OP
joehat
New is easy, I would like to see me some replacement boards with old wiring as neat as that!!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss **Show Us Your Installs!!!** in the Australia area at ElectriciansForums.net
OP
LankyWill
Had to install this meter cupboard in a 8 hours, i moved all loads from existing cupboard(now demolished) to new cupboard 20m away and had to re connect everything. It fed a sewage station and a aquaduct so time was precious. Could have been spot on if i had more time but needs must ey.
- Reaction score
- 3,918
I'm just bumping some threads in the Electrical Forum, don't mind me while I do this, you don't have to respond to them. Although if they are still current topics, and you do wish to reply, you're welcome to. Keep the thread on-topic and make sure you stick to the forum rules though.
Reply to **Show Us Your Installs!!!** in the Australia area at ElectriciansForums.net
Similar Threads
Morning all,
Really hoping to get some advice / confirm what a few of us are thinking about a job in the future.
Back ground - We have to swap...
Bit of a rant first to explain the situation:-
Effing builders again, I knew there was a reason we hardly ever work for them. We've done a few...
I'm unsure if I should be an electrician or maybe another trade is better.
I have basically completed my first year of a foundation in...
Hi all,
My question relates to the omission of overcurrent protection (specifically overload and fault protection) at the origin of an...
Hello !
I am building for some time a cct to drive a 3digit multiplexed LCD. (from aliexpress)
From the sellers on aliexpress I managed to find...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Fitting bolt in fittingsecure the bolt head with some tape or gorilla glue. it's supposed to be captive but relies on...- Latest: telectrix
-
Does a SPD need a dedicated MCB?Why would I be on the windup, not everyone is a goody two shoes. Anyway went today and found...
- Latest: oscar21
-
Indesit oven error F53 code / no longer heating upThe oven locked itself and the door so I had to turn off the power and can now open it again...
- Latest: Pacman2D
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.