Spotlights and kingspan insulation

[lauriehurman]

Fat chance of that with the Gov telling everybody to put more insulation is their lofts.
Laurie

Thought the idea was to avoid running cables in thermal insulation

 

[telectrix]

that's for the circuit T/E. the flex to each light needs to be rated for only 1 fitting.

 

[SPARTYKUS]

that's for the circuit T/E. the flex to each light needs to be rated for only 1 fitting.

Now you're just being far too clever :freak:

 

[electric will]

that's for the circuit T/E. the flex to each light needs to be rated for only 1 fitting.

agreed, or the flex on pendants would be 1mm

 

[kingeri]

You're out of date Kingeri

1mm is the minimum for lighting now (1.5mm for everything else).

Laurie




Then a length of 2-core 0.75mm heat resistant flex (about 9-12" normally) from each JB to each downlight.

[/QUOTE]


Reg number for this? You can happily supply a fixed load with an appropriately rated cable. The 0.75mm flex is feeding only one light fitting.