Supply down to garden shed

[chris day]

Small garden shed needs supply for x2 socket and a lights.

Client does not want anything fancy like a fuse board due to light usage of garden lawn mowers

Socket will only be used for lawn mowers.

The supply will be taken from the existing ground floor ring, the SWA from the house to the shed will be clipped to the garden solid wall, length of run 10 meters.

My question is would I need to put the fused spur at our point the circuit leaves the ring (rear house) or could I put the fused spur in the shed?

I will then use a 6a fused spur for the lights respectively

 

[Spoon]

Have you not been reading a similar thread on this forum?
New circuit to detached shed/garage in garden. - https://www.electriciansforums.co.uk/threads/new-circuit-to-detached-shed-garage-in-garden.173521/
It's gone slightly off track at the mo...

 

[chris day]

I have read it yes, but his question regards larger usage, if I were this person is would run a new 32a circuit with RCD protection

 

[Spoon]

I have read it yes, but his question regards larger usage, if I were this person is would run a new 32a circuit with RCD protection

So your customer is happy with having 13A max?

 

[chris day]

Yes correct they are happy with 13a capacity , it’s only going to be for the lawn mower at the bottom of the garden

 

[Spoon]

OK, what does Appendix 15 (page 505 of BBB) tell you to do?

Not getting as you mate...

 

[buzzlightyear]

OK, what does Appendix 15 (page 505 of BBB) tell you to do

read it .

 

[Spoon]

read it .

I have it on my comp now... That's how I found the page number..

 

[chris day]

Do not currently have BBB on the train, if you could kindly gobble up the information you have taken that would be very kind

 

[Spoon]

There you go mate.