Valve cable

[APSH]

Hi guys, not done much central heating work but my dad has asked me to wire up his new system and it has two heating valves and one hot water on an s plan but one of the valves cables are short and don't reach the wiring control centre. I have tried to source some cable like the cable on the valve but not had any luck I would be grateful if someone can point me in the right direction for some cable suitable for the valve. Sorry it is a basic question but as I have said I don't usually do c/h and the ones I have done the cables have been long enough to reach the control box.
Thanks for any help.

APSH

 

[mark ju]

Always a pain when this happens. I should think five core hr flex as used in heating systems would do the trick

 

[murray2707]

Try and get the valve flex pulled to somewhere accessible and into a joint box then come from that with your 5/6core flex or use 2x a 3/4core and remember what core is used for what. Always a pain when the valves and stats are spread around the house

 

[APSH]

Hi guys. Did think about hr flex with a joint. Thanks for info. Cheers.