Wera Blades VDE

[stuart569]

Alright guys. Anyone know where I can get replacement blades for (link removed) Been doing a bit of google bashing but having no luck

 

[trypod]

What set
link does not work

try RS

 

[stuart569]

This set Tried them

 

[MarkieSparkie]

Looks like the link has been blocked, 'to protect sponsors interests', by the forum software mate. I'm guessing you are seeking new Wera Kraftform Kompakt VDE screwdriver blades for the interchangeable screwdriver kit. I've just checked the current Wera catalogue, they are available from the manufacturer, but so far I've been unable to find a supplier.

Update the only supplier I can find is on Amazon.Com:

 

[stuart569]

Yep i found them on the wera website too along with model number etc but cannot find a supplier. I bought them on the presumption that getting new blades would be easy as thats how they advertised. Bas*#$ds!!

 

[Mark_Burgess]

I used to have a wera catalogue, I could go to my local tool dealer and get them to order anything out of it if it were available. I go to ElloittsTools in portsmouth, they will do everything they possibly can to get what ever you want from any manufacturer.

If you get part numbers for the blades you need, give them a call as they will dispatch.

 

[MarkieSparkie]

Stuart see my update at post #4

 

[stuart569]

Cheers MarkieSparkie. Will go price up and see if its worth getting spares or just ordering a new set. May try that also Mark! Asked at Edmunsons if they could order in blades as that's where I bought the set and they weren't helpful in the slightest.

 

[MarkieSparkie]

Cheers MarkieSparkie. Will go price up and see if its worth getting spares or just ordering a new set. May try that also Mark! Asked at Edmunsons if they could order in blades as that's where I bought the set and they weren't helpful in the slightest.

Yep, that's the typical Eddies experience unfortunately. Try and find a quality tool shop, specialising in hand tools in your area, they are more likely to offer a good service and want your order.

 

[ezzzekiel]

farnell was only place i could find when i broke the +- tip, emailed wera and they sent a replacement, worth a try.

 

[stuart569]

Thanks for all the help guys. Will look into this over the weekend and will let you know how I get on. Cheers!!

 

[rickwookie]

I know this thread is a few months old, but for anyone else with this set, I think I may have found a source for the full slection of blades (including torx!) for this set (unlike farnel, who only seem to have a subset).

I need to post 6 posts apparently before I can give you the link, so..

- - - Updated - - -

...here's the second post...

- - - Updated - - -

...and this is the third post...

 

[rickwookie]

...ah well this stupid site still won't let me post the link, so basically, if you go to shop4fasteners dot co dot uk and search for "Wera Kraftform Kompakt VDE Blades" you'll find them.

 

[rickwookie]

Here's the link:

shop4fasteners.co.uk

 

[sparkydude]

Any updates on stockists for these as just broke my small terminal and need a replacement


Nick

 

[richy3333]

farnell was only place i could find when i broke the +- tip, emailed wera and they sent a replacement, worth a try.

Wera sent me a replacement too. Very helpful.

 

[sparkydude]

Cheers , will drop them a mail

Have found them on farnel aswell, and not tooo expensive, only annoying thing is having to spend a minimum £20 Hmph

Nick

 

[telectrix]

sure you can find something else useful on their site. think if you can make the order up to £50 ex. VAT, the postage/carriage is free.