Discuss What is it called IR testing? in the Electrical Testing & PAT Testing Forum area at ElectriciansForums.net

The SI prefix M is Mega.

In combining the prefix with the unit name, the prefixes' final vowel is retained, except in the case of “hectare”. The American National Standard* also calls for the spellings “megohm” and “kilohm”, but the spelling “megaohm” is often encountered.
 
Megaohm or Mega Ohm or MΩ

It should never be truncated in spite of what the US does.

Things end up with different meanings, for example
1 millimetre is 1mm or 0.039"
1 mil is 0.001" or 0.0254mm

So giving a dimension as 156mil - is that really what you mean? Something around 5/32"

Annoys the hell out of me as insulation (dielectric breakdown) is measured in both V/mm and V/mil and people will say air is 3kV per mil - no it isn't you muppet air is circ 3kV per mm or 100V per mill (it isn't a straight conversion!)
 
It’s an insulation resistance meter, combined with a continuity meter, and nowadays performs earth loop impedance and rcd operational tests.

Some might call it a multi function tester….

Others still call it a “meggar”


As for the measurements taken… it’s Megaohm

Like megawatt, megaton, etc
 

Reply to What is it called IR testing? in the Electrical Testing & PAT Testing Forum area at ElectriciansForums.net

Similar Threads

G99 SGI-3 4.4 kw set export limit phase to neutral loop impedance test on site 0.309 ohms and dno max being 180 m ohms or 0.018 ohms so site...
Replies
11
Views
1K
Insulation test live to earth = 0.7 ohms. This is a long length of buried swa cable (approx 100m) from mains in to submain. Test done with live...
Replies
35
Views
1K
So I’m an apprentice and I’m just trying to get a better understanding of the science behind this because the electricians who have said it have...
Replies
12
Views
1K
Evening everyone . I was changing a fuse board today . Everything tested out fine and good . Until I measured the Ze which is on a tnc-s system...
Replies
7
Views
828
Hi guys, Had an issue at a recent survey where doing a quick check and found we had pme with a reading of 0.44 ohms. Called the network and they...
Replies
5
Views
324

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock