- Reaction score
- 1,665
Do y’all measure inside diameter or intrude for example 1 inch or 25.4mmI have had the same happen to me. Also at CEF. Probably charged the same as class 4 also.
Discuss Why? Is metal conduit so thick in the UK Electrical Forum area at ElectriciansForums.net
Do y’all measure inside diameter or intrude for example 1 inch or 25.4mmI have had the same happen to me. Also at CEF. Probably charged the same as class 4 also.
What kind of bender are you using?Are you sure it’s conduit and not some other kind of pipe
20mm/ 25mm OD is for steel conduit.Do y’all measure inside diameter or intrude for example 1 inch or 25.4mm
I don’t know if many people that like bending ridged conduit.20mm/ 25mm OD is for steel conduit.
Hilmor stand vice with conduit bender and interchangeable formers.
It's the overall diameter as far as I knowDo y’all measure inside diameter or intrude for example 1 inch or 25.4mm
Are you sure it’s conduit and not some other kind of pipe
Me too....but I wonder how many of today's 'electricians' can.Yes, I'm pretty sure I can tell the difference.
I was at a plant on one job and sent a worker to go across the street and get us some 3/4 pipe at the other plant and he came back real excited and had 20 foot pieces of water pipe. We give him a hard timeMe too....but I wonder how many of today's 'electricians' can.
Please, nobody take that as an insult. Remember there are tens of thousands throughout the country. I've seen plenty of indication that those who've done particular installations can't even bend conduit and, on one occasion, a lack of reaming causing a direct short circuit.
Reply to Why? Is metal conduit so thick in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.