Discuss Would 10mm tails be acceptable? in the Electrical Forum area at ElectriciansForums.net

happyhippydad

-
Arms
Esteemed
Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

I will be fitting a henly block to split the meter tails. I'll be taking some tails 1-2m a new shower consumer unit (63A RCD and 45AMCB) with no spare ways to fit extra MCB's. I'm not sure what the cutout fuse size is.

I was planning on using 16mm tails but would 10mm tails be acceptable?

Regulation 433.3.1 (ii) states that over current protection need not be provided in this example.
 
B

Bobster

You must be logged in to see the message.
 

happyhippydad

-
Arms
Esteemed
  • Thread Starter Thread Starter
  • #6
You must be logged in to see the message.
 

Strima

-
Arms
Esteemed
You must be logged in to see the message.
 

Ian1981

-
Mentor
Arms
Esteemed
You must be logged in to see the message.
 
You must be logged in to see the message.
 
D

Deleted member 26818

You must be logged in to see the message.
 
B

Bobster

You must be logged in to see the message.
 

MFS Electrical

-
Mentor
Arms
Esteemed
You must be logged in to see the message.
 

Dave OCD

-
Mentor
Arms
Esteemed
You must be logged in to see the message.
 
Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members

Reply to Would 10mm tails be acceptable? in the Electrical Forum area at ElectriciansForums.net

Aico Carbon Monoxide Detectors
This official sponsor may provide discounts for members
Top Bottom