internalflame
DIY
- Reaction score
- 0
Anyone has a wylex 6 way board? Please let me know!
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter internalflame
- Start date
Search the forum,
Discuss Wylex 6 way board - need urgently!! in the UK Electrical Forum area at ElectriciansForums.net
- Reaction score
- 17,150
I think he’s just looking for a cover for one.
- Reaction score
- 8,194
Loads and Loads of old Wylex Carp on Ebay
- Reaction score
- 8,936
Tell us the full story! Joining a forum at 2:32am to urgently ask for an obsolete item is a bit unusual, even for the brilliantly diverse range of characters who gather here....!
As above ebay is likely your best bet as you can see exactly what you are getting. I think "Wylex 6 way" could be wooden-backed, all-plastic cream or grey, or metal clad so a bit more info is needed, maybe a photo.
As above ebay is likely your best bet as you can see exactly what you are getting. I think "Wylex 6 way" could be wooden-backed, all-plastic cream or grey, or metal clad so a bit more info is needed, maybe a photo.
Reply to Wylex 6 way board - need urgently!! in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
Been asked to move, remove and add some sockets the kitchen and I’ll need to add a circuit for an electric hob.
Looked at the board and it’s one...
What are people fitting in the 3 phase range just lately, I've had a scan at various makes and it seems to be a ---- up between Hager and Wylex at...
Do I need any more than this to fit the above board, does it need a fitting kit for the switch or anything extra to get it up and running (tails...
Customer has a Wylex NS11 board with NSC cartridge fuses.
They want some work doing, so now need RCD protection.
The NHXB RCBO have always been a...
My builder has sprung a job on me.
New circuit required for a hob.
The CU has a single 30mA RCD, type AC.
I am still unsure exactly when I should...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Unreasonably high invoice bill from an electricianMakes you wonder how postman, bus drivers and most couriers cope.- Latest: Mike Johnson
-
What is it called IR testing?My kyoritsu (kewtech) analogue insulation tester that I use as my daily driver has a locking...- Latest: Marvo
-
Mira vision remote control pairing issuehttps://www.electriciansforums.net/threads/mira-shower.194527/#post-1708398 See post #9 🤔 but...- Latest: Avo Mk8
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.