SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members

Discuss Zones in stud walls in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Do zones have to be adhered to in a stud wall? The stud is 70mm with 60mm 30mm board on one side and 47mm on the other side
 
Aico 3000 Range
This official sponsor may provide discounts for members

telectrix

-
Mentor
Arms
Esteemed
if the cables are > 50mm deep from both sides, the zones might not apply, but i'd stick to them anyway.
 

littlespark

-
Arms
Esteemed
Zones extend through a wall to the other side, so it shouldnt it matter where cables are inside the wall?
 

Reply to Zones in stud walls in the Electrical Forum area at ElectriciansForums.net

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
Top Bottom