ev charger

  1. E

    13amp or 40amp socket for EV charger whilst using an extension cable.

    I am looking for advice on getting an upgraded 25 meter extension cable from my office into my car park to charge my EV from an IP66 rated socket, from a standard Tesla 3 pin plug - plug in charger. I know not to use normal off the shelf extension cables as they're naff, melt and are a fire...
  2. PuddingMan

    Need to get new EICR after installing EV Charger?

    Hello everyone! I am curious to know if we need a new Electrical Installation Condition Report (EICR) after installing an electric vehicle charger at our property. Does anyone have any knowledge or experience with this? Any advice would be appreciated. The most recent EICR was only issued in...
  3. N

    moving an ev charger

    my son has recently had an ev charger installed for his car (last week) cost was £900, simple run ,consumer unit on outside wall ,drill through to garage and armour cable run of 3 metres to the charging point.Not disputing the cost as hopefully they have provided the relevant certs etc. now...
  4. R

    EV charger causing ground overheating

    Had an EV charger installed in July last year. It’s wired directly off the mains. Since end of November anytime I plug the car in to charge, the earth/ground wire in the cabling in other appliances in the house is overheating and melting components of the appliance until the main RCD trips...
  5. Nexblue

    Hi everyone, nice to meet you!

    Hi Everyone! Thanks for adding! I am happy to be part of your community. I am Benjamin, a French entrepreneur based in Berlin, Germany. Me and my friends recently noticed that EV chargers are not intuitive, and the installation is never simple: Installers, customers and engineers are...
  6. D

    Amazon move into the EV charger install markt

  7. mattg4321

    Which Untethered EV charger

    I’ve got a job coming up where the customer wants an EVSE fitted in their rear communal parking area 50m from the house. As such there are a few unusual requirements. LAN/Ethernet connection is a must. I don’t want to be relying on Wi-Fi at that distance. Customer ideally wants untethered...
  8. I

    Separate connections to a EV charger and garage supply

    Hi all, Newly qualified electrician here who is in the process of re-wiring my own property. I have recently converted my old CU (if I can call it that!) in my 1950's property to a full RCBO C.U. (No SPD). Main fuse is 100A. Double pole isolator fitted prior to C.U.. 100A double pole switch...
  9. T

    EV Charger advice for ski lodge

    We have an unusual situation being a British-run ski lodge near Chamonix, France. The chalet is a 1930's, 20-bedroom facility run for around 200 private members that include a growing number of EV owners. We would like to get three 7 or 22kw EV charging points installed in the car park but...
  10. J

    Customer questioning his zappi EV charger.

    Hi Everyone, before I start ill admit I have very little knowledge of EV chargers etc, I have had a question from a customer who has had a 7kw zappi installed and his wife has just bought an audi a3 tfsi e. This apparently will only charge at a max rate of 2.9kw as its a hybrid, hes concerned...
  11. sythai

    EV - after few pointers please

    Hi Guys Not been involved with any EV much as of yet. But time has come now with new LABC regs that we have to fit on all new builds. Did the Niceic (think was 1/2 day) EV course 2-3 years ago, then signed myself up as a pod-point installer. That was about it ! All the OLEV paperwork put me...
  12. H

    How far from the house can I install a 7kw EV charger? Would 40m be possible?

    How far from the house can I install a 7kw EV charger? Would 40m be possible?
  13. B

    EV charger on split phase?

    I have a single 7kW EV charger that serves three holiday cottage. The supply to it is E7, with the night rate currently at exactly half the day rate, so most users charge at night, controlling the charge from apps. on their 'phones. Batteries are getting bigger, so it's becoming difficult to get...
  14. R

    Tesla Gen 3 EV charger

    Has anyone installed the Gen 3 Tesla EV charger. Is an RCD required at the supply as it says it has a type A one built into the unit. Also can anyone recommend a good Open pen detection device?
  15. Rockingit

    EV charger (for me) - what's the lowdown on the easiest/cheapest way to do it?

    I'm going to start some construction projects at my own gaff soon, including sorting out some better outdoor supplies. Currently have a 32a supply via SWA in what I think (need to check!) is 10mm which the previous installer has conveniently put a junction box join for right where I can...
  16. P

    Separate meter install for EV charger?

    I am looking to install an EV home charger for one vehicle, but possibly two in the future. I have a second unused (but still active) mains supply cable from a time when we had electric heaters. Unfortunately the separate meter on this supply was removed a few years back. It would seem to be...
  17. R

    How to position CT clamps correctly so solar does not interfere with EV charger.

    We recently had a solar panel system put it in. The solar batteries were delayed and put in after, at which point it became clear that the CT clamp for the solar system was positioned on the wrong cable. The inverter was reading the power generated by the solar system and including it in the...
  18. R

    How to position CT clamps correctly so solar does not interfere with EV charger.

    This is a DIYer looking for assistance: We recently had a solar panel system put it in. The solar batteries were delayed and put in after, at which point it became clear that the CT clamp for the solar system was positioned on the wrong cable. The inverter was reading the power generated by the...
  19. t01474

    Token Operated EV Charger

    Evening everybody. A Landlord who's pub I do a bit of work in called me today to discuss putting an EV Charger in for customer use. His idea was to charge £x for 60mins. I vaguely remember that Rolec had a token operated EV Charger but I'm not sure if they still make it. A fair bit of Google...
  20. R

    Upgrade Consumer Unit in Garage with EV Charger Capability.

    I’m looking to get my consumer unit upgraded in my Garage as it’s an old Chint board that is not very good.. My Dad is looking at EV Chargers too and I was wondering if it’s possible to get a consumer unit that would handle that. The current board has MCBs for 6A - Lighting 16A Electric Fire...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock