industry

Recent contents Top users
  1. E

    End of Solar

    Solar end A little note to all the electricians in here who, over the past few weeks , are calling for a U-turn in the government's proposed changes in the FIT. Did you think this industry was sustainable with the 43.3p FIT? It has been clear for some time now it has not been and was going...
  2. D

    You think the industry is tightening up on safety then i walk on this site......

    Just got a random call from a guy based in bristol asking me if i could go to a building site local to me in Bradford and look at a cable thats sparking for him as they supply the generators and cables, well not for one to turn down what seems a quick repair job i popped over. It turned out to...
  3. T

    How much damage has been caused to the Renewables Industry?

    As a company already in the home energy market we got accreditation for PV and solar thermal about 3 weeks ago. This was seen as the first stepping stone in taking the business into most if not all of the renewable technologies. We were just finalising our marketing plans when the government...
  4. S

    New MCS 001?????

    As if we don't have enough to do there's now a new edition of MCS001 that takes effect from 1st December, only problem is I can't find it anywhere!! Any clues????
  5. H

    This industry is becoming a joke. primarily focused on squeezing £ out of us

    The 2391 is noww to be replaced with the 2395 as the 2391 does comply with ammendment 1. No sooner do you pay all you fees does something else come along. I'm sick of it. How are you meant to make any money with membership fees, calibration certificates, multi-functional prices etc etc. All the...
    • highspark
    • Thread
    • becoming industry out
    • Replies: 2
    • Forum: Australia
  6. E

    Construction Industry Scheme

    Hi all, Does PV qualify under the Construction Industry Scheme? We use self employed labour one or two days a week to help with installs and having to do their tax for them sounds way over the top to me! Atm they invoice us as any other supplier does...
  7. J

    Industry failing us

    I just wanted to post a bit of a moan I suppose, i think it's ashame how electrical industry falling to peices, with all these short courses on offer to part time cowboys, what happened to 4 year apprenticeships then calling yourself a spark, no wonder wages are rubbish and standard of work is...
    • Jonson
    • Thread
    • industry
    • Replies: 109
    • Forum: Australia
  8. U

    Are you happy with the cost of MCS registration

    Hi Guys I am a self employed heating engineer and I am extremly unhappy with the cost of becoming MCS accredited, but what I am truly angry about is this ridiculous QMS beurocracy that is not a help to my business but as I see it a hinderence. If you are interested in what I and many heating...
  9. R

    How recognised is 17th Edition Qualification in the industry?

    Hi, Im new to the forum and I was just wondering how recognised the 17th Edition qualification was in the electrical industry and whether doing it is worth my time. I have SOME previous experience in Electrical installation (college course) but that was a while ago and I've decided to get back...
    • reddish
    • Thread
    • 17th 17th edition edition industry qualification recognised
    • Replies: 4
    • Forum: Business Related
  10. W

    will working on Cruise ship give me the similar experience as the industry

    Hey people, I'm paul and I'm new to the forum and i need advice about what i should do next, sorry if this is no this is not where you post it. My Question is this, i after i finish my 303 practical (if i pass) I'm worried what will come after as jobs are low in my area, my tutor said to join a...
    • Wright20
    • Thread
    • after earth electrical work experience going industry similar water working
    • Replies: 31
    • Forum: Australia
  11. B

    Construction Industry Scheme

    Are those of you who are small companies doing solar pv registered under the HMRC Construction Industry Scheme (if you care to admit it in a public forum). The reason I ask is that I thought I would be able to avoid it as I do not subcontract to other companies, but I spotted something on...
  12. B

    JIB Electrotechnical Certification Scheme (ECS) JIB Rates of Pay

    Good Morning Can you please advise on what the 2011 JIB rates of pay are for an Electrician & an Approved Electrician
  13. N

    Mining Industry?

    Does anyone in this forum happen to work in the Mining Industry or know how to get a foot in the door so to speak? What qualifications are needed? How much level of experience is needed? What sort of people are they looking for? etc.... I realise that i have a long way to go as i am new to the...
    • nick182
    • Thread
    • industry
    • Replies: 2
    • Forum: Australia
  14. A

    What training is recommended?

    I have been out the industry for 10 years, even though I have kept abreast of regulations. I am a apprentice served, having 20 years exp, HNC Electrical Eng and a BSc in Electrical and Electronic Eng. I am looking to enter the Industry again and I'm looking to sit the 17th Edition Full Exam and...
    • Andyfirth
    • Thread
    • again course industry qualifications recommended training years
    • Replies: 9
    • Forum: Business Related
  15. H

    And we wonder why the future of our industry in bleak

    2 third year JTL apprentices and I spotted them doing this!! And people wonder why the industry is going down hill!!
    • High Tower
    • Thread
    • future industry wonder
    • Replies: 44
    • Forum: Australia
  16. M

    Ways to progress in the industry.

    What are some of the options available to progress within the electrical/construction industry? If I could do some evening courses what would you recommend? Im open to any sort of advice, so far I was thinking perhaps doing some electronics courses? But not sure of what my options are, in...
    • Mikey
    • Thread
    • industry
    • Replies: 8
    • Forum: Australia
  17. S

    Fully installed prices

    How much for SolarPV? - MoneySavingExpert.com Forums found this - some of the prices are scary, won't be worth all the MCS hassle shortly - 13k for 3.9 Sanyo system .... what does everyone else think?
  18. A

    hi guys squaddie needing some advice about the industry!

    hi guys, im currently serving in the royal engineers as a military electrician (i gained 2381 doing this), im leaving service in the next few months. Im looking to get into the indusrty when i leave (ive completed 2382, part p and sitting 2391 end of feb). Sparking in the army is different than...
  19. R

    Big news for the industry

    Just heard the news, from the 1st July 2011 only NVQ Level 3 holders will be allowed to register as a qualified supervisor. Looks like the end of the 4-6 week trained electrician. Thoughts anyone!? Guess there will be a rush of people getting on a 4 week course before the deadline!!! Secondly...
    • ricardo123
    • Thread
    • industry news
    • Replies: 81
    • Forum: Australia
  20. E

    cant seem to get in the electrical industry :(

    Hey guys and girls. Im 18 want to be an electrician but cant seem to get into it :(. I have my City and Guilds level 2, NVQ Performing Engineering Operations, Key skills level 2, All recieved from college and now i want to take the apprenticeship route and complete my Level 3 on day release but...
    • erolosman
    • Thread
    • electric electrical get industry
    • Replies: 13
    • Forum: Australia

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

Tilers | UK Tiling Forum | Tilers Forums | Find a Tiler
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Gas Forum | Unofficial Gas Safe Register Forum
Workwear Shropshire
Top Bottom
Back