metrel

Search the forum,
Recent contents Top users
  1. A

    Metrel 61557

    Hi all, Is there anyone out there that has a Metrel 61557. If so can you explain the Uc , Rl mode number 10 on my machine? You set the values to 30mA G and then carry out the test. I think it is so you can test Zs at the socket without tripping the RCD. When the test is complete you get three...
  2. F

    Metrel multi tester mi 2087 al2

    For sale in excellent condition as new my metrel easitest multi function tester, no trip loop and auto-rcd and all other usual tests preformed. Comes with books, carry bag, all leads, clips, two long extension leads for bonding tests. Fully calibrated 12mths, lovely easy to use tester...
  3. M

    Metrel mi3000 easi plus tester

    Hi was wondering if any of you have this meter or know if it is any good. I've read some decent reviews in the internet but would like to get your opinions Thanks
  4. O

    My Metrel MFT

    On Wednesday I was in a bit of a panic as I thought my beloved MFT had developed a fault - specifically when taking a Zs reading, the MFT would do the test and keep on doing the test.... So I borrowed a tester to complete the job... and have another now almost ready to use. I've now tried my...
  5. S

    Metrel MI3000 Easi Plus MFT Standard Test Probes GS38?

    Here goes - Post number 2. First one wasn't too bad (apart from a few jokes about Diversity being a dance act and Susan Boyle (anyway I won't go on)). I have a Metrel MI3000 Easi Plus MFT. The probes look GS38 compliant except they have no inline fuses in the body. GS38 says "should have...
  6. A

    metrel installtest 61557

    as above im looking to buy a multifunction tester i use a megger 1502/2 at work and ive used flukes before, but ive not had much experience of metrel i remember my old boss had a similar looking unit but yellow, i was just wondering if any of you use 1 and what theyre like? they dont look to...
  7. S

    Metrel Reading

    Hi Doing Zs on a stage lighting rack system, my metrel easitest faithful.....gave me a reading of >20 ohms (sign) and underneath rLn. I know that there are electronics involved with the rack system, and I am half tempted to test the unit with the PAT tester, seperately. I was checking each...
  8. truckster

    Metrel M13000

    Anyone had experience of this tester? Dubious of the price, is it cheap crap or value for money?
  9. G

    touch voltage

    Hi all, went out today for new leads for my mft and came back with a new Metrel,3002dl bargain however when reading the manual you can select the touch voltage for RCD tests,my old tester didn,t have this feature can anyone advise best touch voltage to set it at please?
  10. P

    Metrel Tip Commander

    Hi. Does anyone know if any of the Tip Commanders fit the MI3000. I have only found one website that claims to have one (A1194, 3 wire). Many thanks, Pete.
  11. M

    Metrel 16th edition test meters. can I still use these.

    Hi, I am sitting my 2391 later this year and have been given a set of Metrel testers which were last calibrated in 2010 expiring in early 2011. These are MI 2121/ 2122/ and 2123 ( continuity/ir/rcd with ramp test facility and z loop tester with PSC) These are stated as 16th edition. they...
  12. S

    Metrel Gamma Pat 3311-Good?

    Hi considering buying the Gamma Pat 3311 Pro, which as a downloadable bit of kit is cheaper than most. Does anyone use this kit and is either Happy or unhappy with it? I have other Alphatek equipment, and although not brilliant they do the job and usually do it quite well, I realise that you...
  13. F

    Metrel gamma pat

    Hia people i have a metrel gamma pat 3311, I have just bought a new laptop and cannot find the cd to upload the software to send results etc. Does any one have this disc that I could rent for a fee? Or have the disc for sale? I was pretty sure you could load it on more than one laptop but my...
  14. D

    Metrel MFT 13A plug connector

    Bought my MI3000 recently and I'm well pleased with it. Checked my first install recently with it and very pleased with how user-friendly it is. However, I did note that I had problems doing R1+R2 using the 13A plug lead included with it. No trouble at all using it to do the insulation...
  15. S

    Metrel certificates

    Is there anyone out there who has used the METREL MET03 minor works electrical installation certificate before? Reason I ask is I've just bought some to use just while I pass napit assessment and there are two parts on it that I've not come across in a minor works certificate before. In the...
  16. B

    For Sale Metrel MI3000 Easi Plus Multifunction Tester.

    Paid about 420ish for this less than a year ago, perfect working order everything there. Metrel MI3000 Easi Plus 17th Edition Multifunction Tester also has R2 socket adapter with it - Kewcheck R2 Socket Adaptor - R2 - Test Without Removing Wall Socket say 300 ono + postage (or collection)...
  17. B

    Metrel Betapat plus problem

    Hi guys, i have a betapat plus problem. I cannot recall saved tests once i get back to the office. It says that there are results there but when i do a search it just says0/200 results. I can download to pc when the results are still on screen but as soon as save it and coe back i cannot...
  18. B

    Megger 1552 vs Fluke 1652 vs Metrel 3100

    Ok, yes I know there are 1000s of posts on which tester is best but my brain is starting to fry with all the options so I'd really love someone to sanity check what I am thinking.... My problem is that I have used all three of these testers but only for specific tasks and I am not experienced...
  19. 5

    megger 1552 earth bonding test.

    ok, please be gentle! i have been given a megger 1552, and it comes with a eath bonding test lead 6231 - 586. can someone remind me how to use it with this piece of kit. i was told once that there was no such thing as a stupid question!
  20. Z

    Metrel mi3000 easi plus Firmware Upgrade

    Just wondering if anyone has successfully upgraded the Firmware on the Metrel Mi 3000 easi-plus..... Work collegue has FW version 1.45 and mine is 1.20....... like all gadgets i like to keep my bits all tickedy boo and brand spankers. Tried looking on Metrel website regards software and...
Tiling Forum

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

UK Tiling Forum
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Tiling Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock