7" Kitchen Fan.. advice needed

[TPES]

Evening All

Ive been to a call out of a kitchen extractor thats packed up..

Its a greenwood AX300 S.

I'm finding it very hard to find any info or anyone who stocks this online.

Does anyone know where i can get a cheap 7" fan, it is domestic, not commercial fan.

If i cant find the exact fan to replace what would you do?
board the hole and cut out 4 or 6 inch hole and just fit a cheaper manrose or something?

Im limited to what size fan i can put in as i would be hitting the water pipes that are very very close to the fan.
Also if too small it will just fall through the hole!

Photos attached..

 

[Spudnik]

I think you are better off boarding the hole and cutting in a 6":

Xpelair SL150 Slimline Extractor Fan

 

[old dog]

dont know if you have one near you the last greenwood fan i used i got from
BEMCO

 

[maddfridge]

Evening All

Ive been to a call out of a kitchen extractor thats packed up..

Its a greenwood AX300 S.

I'm finding it very hard to find any info or anyone who stocks this online.

Does anyone know where i can get a cheap 7" fan, it is domestic, not commercial fan.

If i cant find the exact fan to replace what would you do?
board the hole and cut out 4 or 6 inch hole and just fit a cheaper manrose or something?

Im limited to what size fan i can put in as i would be hitting the water pipes that are very very close to the fan.
Also if too small it will just fall through the hole!

Photos attached..

hi there

you would not have gas appliances in there would you ????????

if you have put in the same fan in case you fall foul of the ventilation etc of the gas regs

cheers