Discuss Advice pls in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

yes that is fine although it maybe a tight squeeze if pulling a seperate circuit for each which you would need to do.!!

its only low voltage cabling such as CAT5 that should be kept away from 230volt power ( at least 50mm ) to prevent interference
 
You should also take into consideration, grouping factor when you are designing the circuit layout.
 
Just make sure you dont mix the circuits say you had tubed a ring main with conduit and you had 4/5 d/so on that conduit you cannot run another circuit through those d/so,s . etc
 

Reply to Advice pls in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock