Pete's Videos Anyone spot the mistake in this install?

[pirate]

It only took him 2.56mins, so probably he missed something!

 

[Devonchris]

Dodgy background music?

There is no torquing

 

[The Ghost]

Maybe I can see how the neutrals work looking closer but something is not right.

 

[davesparks]

Fine stranded wire without ferules? Plus it's far too neat!

As they are manufactured supplies like they almost certainly have ultrasonically welded ends, this is a perfectly acceptable alternative to ferrules.

 

[Pete999]

Isn't this one of your repeats Pete?

Don't know Middy done so many, just thought it would be a bit of fun.

There is no torquing

Why it's not a Library.

 

[Dave OCD]

He didn't appear to tighten all of the MCBs onto the busbar Pete, but probably that was just editing. Nice neat job though, reminds me of one of mine.

 

[Pete999]

He didn't appear to tighten all of the MCBs onto the busbar Pete, but probably that was just editing. Nice neat job though, reminds me of one of mine.

Nothing like blowing your own trumpet

 

[Dave OCD]

It was in jest Pete as I'm sure you know - anyway mine are better than that.

 

[Pete999]

It was in jest Pete as I'm sure you know - anyway mine are better than that.

Sure they are Mate was just kidding around no offence meant, I hope none taken.

 

[Dave OCD]

Of course not Pete !

 

[Midwest]

As they are manufactured supplies like they almost certainly have ultrasonically welded ends, this is a perfectly acceptable alternative to ferrules.

You've been had as well.

 

[The Ghost]

Think I might prefer the main switch off while doing that work.

 

[The Ghost]

Ediot.

 

[AJshep]

I would have put a bigger board in i would off allowed a couple of spare ways for future expansion.

 

[Sparksaflyin]

Earthing conductor looks correct size, appears to be the correct amount of cpcs required for amount of circuits, bonding will be going off to another met closer to service head....... you got me Pete! Curious now.......

 

[Sparksaflyin]

I would have put a bigger board in i would off allowed a couple of spare ways for future expansion.

He hasn’t left 20% free no but got to be something wrong specifically with the earthing system if he’s saying think green and yellow

 

[davesparks]

Earthing conductor looks correct size, appears to be the correct amount of cpcs required for amount of circuits, bonding will be going off to another met closer to service head....... you got me Pete! Curious now.......

Not another MET, there is only one MET for an installation (assuming there is only one incoming supply)
If there is another terminal after the MET where binding conductors are connected it is an EMT or EMB (earth marshalling terminal or bar)

 

[Sparksaflyin]

Not another MET, there is only one MET for an installation (assuming there is only one incoming supply)
If there is another terminal after the MET where binding conductors are connected it is an EMT or EMB (earth marshalling terminal or bar)

Never heard of it. I was always taught that the earth bar inside a consumer unit for all intents and purposes was considered a main earthing terminal, especiallly when met is referenced to in bs7671. Another example is when referenced to in your schedule of inspections on either an eicr or initial verification

 

[Toneyz]

So what was the answer you were thinking of when posting Pete?

 

[Sparksaflyin]

Not saying I’m correct by the way, I’m just saying that’s how I was taught