blank ceiling rose

[Dafydd1]

Hi Can anyone tell me where I can get a blank ceiling rose to cover an unused point?
cheers
David

 

[littlespark]

Just use a ceiling rose without the pendant attached.

 

[Risteard]

Just use a ceiling rose without the pendant attached.

The problem is that there will be a hole at the cable entry point.

 

[littlespark]

The problem is that there will be a hole at the cable entry point.

Ceiling roses have never been ip rated. You can’t stick a British standard finger in there.

Can always bung it up with mastic.

 

[Risteard]

Ceiling roses have never been ip rated. You can’t stick a British standard finger in there.

Can always bung it up with mastic.

I'm not suggesting that it's a real-world problem - but it's something I wouldn't accept. I hate seeing them used as JBs.

 

[Pete999]

Just use a ceiling rose without the pendant attached.

OK but the rose wi;; have a dirty great hole in the centre
[automerge]1576939589[/automerge]

OK but the rose wi;; have a dirty great hole in the centre

Stick a white JB in, oh sorry 7671 says Uh Uh no can do

 

[DT1991]

Remove pendant, cut hole and fit round fast fit box in, connections inside and fit over sized box lid over it.

Depends how much mess you want to make and what you are trying to achieve.

 

[littlespark]

Thread is in DIY section, so I suggested something that a capable diy person could achieve. White rose on white ceiling is hardly noticeable.
And cables will be safely terminated. Better that than taped up and pushed into ceiling.

 

[DT1991]

Thread is in DIY section, so I suggested something that a capable diy person could achieve. White rose on white ceiling is hardly noticeable.
And cables will be safely terminated. Better that than taped up and pushed into ceiling.

Missed the DIY tag, usually I am not allowed to to reply either.

 

[MJPD29]

Remove the pendant. If your concerned with the hole fill it. However it won't pose any danger.