- Reaction score
- 1
Hi all, can anyone recommend a good cordless sds. Budget is £200
Thank you
Thank you
Discuss Bosch or Dewalt SDS in the Electrical Tools and Products area at ElectriciansForums.net
I have some erbauer gear I bought to abuse and if it broke I wasn't too worried. It's been absolutely brilliant the 4 inch grinder has been used and abused and still going strong.Here is the JOKER : Friend bought a Erbeaur SDS cordless to do a job .He is a gardener and needed to drill some posts etc . He has had it a year and it is Faultless .I told him to buy good bits and pilot etc. And he loves it .
Hitachi for that budget. Milwaulkee if you get a decent bonus next week.
Hitachi is now some other name .I think as a bit of a old man .They and Panasonic dropped the ball years ago. They use to be the very best .But they did not produce ranges .And once it all went cordless that was them sunk. I have a old Hitachi Precision drill and i doubt any other brand would be better . My latest spend is a second fix RYOBI (Milwaulkee made??) Nail gun . And I am seriously liking it .The batteries are not cheap for a very very good reason . They plough on for everHaven't heard much about Hitachi for a while , are they good ?
I assumed Milwaukee would be out of price range ?
I have a bosch 18v SDS, great drill but i won't use it for anything except small rawlplugs , perfect for that
Blimey, bit of an overkill for small rawlplugs........I have a bosch 18v SDS, great drill but i won't use it for anything except small rawlplugs
That's what the 12v milwaukee sds is for. I'd be putting my 18v to more work than thatHaven't heard much about Hitachi for a while , are they good ?
I assumed Milwaukee would be out of price range ?
I have a bosch 18v SDS, great drill but i won't use it for anything except small rawlplugs , perfect for that
That's what the 12v milwaukee sds is for. I'd be putting my 18v to more work than that
With reference to your post#6 will that be for the larger 'Brown' rawlplugs???
My personal opinion:
I used to be full Makita but the quality nowadays is absolute garbage and i'd never use them again. Batteries are crap, build quality sucks.
I had a bunch of blue Bosch 110v stuff and that was meh.
Tried Ryobi and they are like toy town tools, absolute garbage.
Once i'd had enough of crap tools i watched a load of tool reviews online and for battery stuff, DeWalt's 18v stuff comes out on top in almost every test i've ever seen in terms of battery longevity, torque and speed of getting the job done.
The 18v cordless eats through joists for fun.
So i went out and bought a load - i think £800 for a multi tool, cordless, plane, circ saw, light, jigsaw and two solid carry boxes, plus charger and 3 batteries.
The cordless is a bit weighty but the power on it is incredible. One of those where if you go to take a bit out and accidentally have it the wrong direction it will take your skin off.
Don't get me started on the way they number power tools. Unnecessarily confusing and very very hard to compare against each other. Instead of the DWLX455504 being the 4ah and the DWLX455505 being the 5ah and the DWLX455505X being the 5ah with separate battery etc why don't they just give them a name, and then do different versions. 'This is the DeWalt 5 Range. It's the most professional of all our tools. It offers three drills - the 5.0ah 18v, the 4.0ah 18v and the 2.0ah 12v.'Big problem with Makita is the range of tools they produce and the issue exists with other manufacturers, albeit to a lesser degree.
Take combi drills as an example: you can buy an extraordinary number of Makita combis, from an ever changing range, that runs from junk up to very capable tools, but people (not unreasonably) expect high performance from a big brand name. At one end of their range you get the DHP453 (not a bad drill for occasional light work, but won't last long in the hands of a tradesman), while at the other end is the exceptionally capable DHP486. A lot of people don't make any distinction between a £40 drill body and one that is closer to £200. It's the same with Dewalt, although their range hasn't been quite so extensive and confusing. Makita provide a 3 year warranty, which gives some level of reassurance.
I find Makita batteries to be very reliable, but they've been left behind in terms of capacity and output. Where significant power is required, they have two options: twin battery (works well) or 40V (different platform). Not sure what Makita will do to catch up, but if it involves a different battery platform there's a good chance I'd take my business elsewhere as tools wear out.
Who makes the best tools? There isn't a simple answer, but from the big names I'd say Milwaukee are probably taking the best route in terms of protecting their reputation, having more or less abandoned the bottom end of the market. While Makita and Dewalt continue to service the DIY market with cheap tools, people are going to question the quality of their products.
The above intentionally omits Bosch Professional as I don't know enough about their current tools - in the past they've produced many excellent products, but also some total junk.
Reply to Bosch or Dewalt SDS in the Electrical Tools and Products area at ElectriciansForums.net
Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.
We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.