- Reaction score
- 25,509
See Regulation 523.9
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter michaelsf90
- Start date
Discuss Cables in cavity with cavity wall insulation in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Reply to Cables in cavity with cavity wall insulation in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
I would like to hide the cable to an EV charger. The consumer unit, meter cabinet and charger would all be on the same wall. About 5 metres from...
Hi
I've inherited a very tight space, a KMF switch and some split-con for a sub-main to try and tidy up. It's a joyous non-restrained single...
Hello All. I'm quite new to this game and gaining experience, but going well in the main.
My customer wants to feed a Hob ( on island in centre...
Hi,
I have two questions about domestic wiring In Ireland
1. Should conduit be used when passing multiple T&E cables (2.5mm) through a garage...
Hi,
I'm about to reroute cables and sockets/switches from the ceiling down to the socket height after insulating a wall.
I understand this will...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Fuel Gauge needle moving with revs issueThe diagram you posted for the non battery model has 4 pins, there are only 2 wires to the...
- Latest: plugsandsparks
-
-
can i book appointmentwell this will make you chuckle,this morning sent a customer an email regarding some work they...- Latest: buzzlightyear
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.