Can anyone identify this part?

[matto123456]

Hi,

I'm trying to fix an old battery pack that won't charge and I'm pretty sure this part is the culprit (when testing with a multimeter this part is breaking the circuit). I'm guessing it's a resistor? Could anyone please direct me to a replacement of the correct type? The second picture is what is written on the side - "10 A" followed by a letter "F" sitting within those two lines. Any help would be appreciated.

Thanks

 

[DPG]

I'd say a a fuse.

 

[telectrix]

what readings do you get with a meter, ohms, capacitance., ?

 

[SJD]

How about one of these:

0251010.HAT1L | Littelfuse PC Board Non Resettable Fuse, Axial 10A, 125V ac/dc | RS

uk.rs-online.com

 

[DPG]

Nice one SJD.

 

[matto123456]

How about one of these:

0251010.HAT1L | Littelfuse PC Board Non Resettable Fuse, Axial 10A, 125V ac/dc | RS

uk.rs-online.com

Perfect, thank you!!!

 

[ruston]

Nice for someone to say thank you.

 

[Zerax]

Isn't this forum amazing !!

 

[DPG]

How come it says there's a new reply to this thread?

 

[littlespark]

Cos you just replied to it, @DPG ?

 

[DPG]

Cos you just replied to it, @DPG ?

Yeah thanks for that. Most helpful

 

[Darkwood]

I would be looking for another issue regarding the charger, check the batteries etc, this is a fuse and will act in a fault condition, the fact it has gone means it is likely it did what it supposed to do because a fault occurred.
When I delve into this stuff which really isn't my field I tend to solder a few tails and fit a loose fuse holder on temp' where I can quickly replace the quick blow fuses assuming I haven't located the fault prior.

 

[DPG]

I would be looking for another issue regarding the charger, check the batteries etc, this is a fuse and will act in a fault condition, the fact it has gone means it is likely it did what it supposed to do because a fault occurred.
When I delve into this stuff which really isn't my field I tend to solder a few tails and fit a loose fuse holder on temp' where I can quickly replace the quick blow fuses assuming I haven't located the fault prior.

He'll have done it by now, it was January.

 

[Darkwood]

He'll have done it by now, it was January.

lol... I should listen to my own advice, I only clocked the last few messages been recent doh

 

[DPG]

lol... I should listen to my own advice, I only clocked the last few messages been recent doh

Yeah for some reason I had an email saying there was a fresh reply to this thread. But there wasn't.

 

[Darkwood]

Yeah for some reason I had an email saying there was a fresh reply to this thread. But there wasn't.

There was then there wasn't, a post was done by a member then deleted by @westward10 as it was a bit misleading as it was a sarcastic post but may not have been interpreted that way to a novice.. you will have got the email flag then found no post as you say because Westward is super efficient and sits there waiting to pounce

 

[DPG]

There was then there wasn't, a post was done by a member then deleted by @westward10 as it was a bit misleading as it was a sarcastic post but may not have been interpreted that way to a novice.. you will have got the email flag then found no post as you say because Westward is super efficient and sits there waiting to pounce

Ah I see. Cheers. Yeah that Westy is always on the ball.

 

[littlespark]

It took 5 months for someone to come up with something so sarcastic it got deleted?

We’re falling behind a bit there, lads.

 

[telectrix]

There was then there wasn't, a post was done by a member then deleted by @westward10 as it was a bit misleading as it was a sarcastic post but may not have been interpreted that way to a novice.. you will have got the email flag then found no post as you say because Westward is super efficient and sits there waiting to pounce

true. half my posts get deleted, even the helpful ones if there's anything like a bit of humour in them.

 

[ipf]

true. half my posts get deleted, even the helpful ones if there's anything like a bit of humour in them.

Hell fire! 130k posts but for that.