M
MDJ
My God I wish I could have posted in this before the Admins closed it, jeez, help, guide me, My god :mad2:
Discuss Change of career in the UK Electrical Forum area at ElectriciansForums.net
Just googled bs7671, I'm not paying that for a book, is there any websites I can use? I've got the bandq do it yourself book somewhere, that pretty much covers what I'll need to know colour wise and where is the best place to put the sockets too?
Just googled bs7671, I'm not paying that for a book, is there any websites I can use? I've got the bandq do it yourself book somewhere, that pretty much covers what I'll need to know colour wise and where is the best place to put the sockets too?
I've got the bandq do it yourself book somewhere, that pretty much covers what I'll need to know colour wise
Yes of course that do, we all very often refer to them leaflets when unsure on what we are doing.
*May contain lies.
So where are the leaflets too? I haven't noticed them before, I going to get in contact with the nearest college tomorrow and see if I can sit the nic exam.
Thomas out of interest what is your day job? Your IQ seems that low i can't actually seem to classify / envision you as anything.
Don't you start as well in another posting he has said he is a FLT driver
He's said that much tosh i've forgotten most of what he's said. Although i am adamant he's probably just a wind-up merchant / troll from another forum sent to cause grief.
If hes driving a FLT with talk like that then god help whoever he works for.
yeah...i mean some of the posts are just out n out crud....Quite.
Whats worrying is the fact that this forum derives sponsorship from these numpty training companies, who promise pots of gold at the end of the rainbow!
Its getting closer, day by day, when I will no longer want to come on here. The place is overun by idiots.
yeah...i mean some of the posts are just out n out crud....
theres something very worrying about it as well....its the amount of posts declaring themselves to be competant to carry out..say a C/U change for example...without a clue as to what paperwork needs filling in for such works...and thats just the start...
Why has my thread been closed? Because people are arguing amongst themselves.... Can someone answer my last post?
I asked if I can just go in a sit the exam? And what book I need to revise from? I will take the day before off work to revise, I can then sit exam and used the extra socket I put in as my nic example
Why has my thread been closed? Because people are arguing amongst themselves.... Can someone answer my last post?
I asked if I can just go in a sit the exam? And what book I need to revise from? I will take the day before off work to revise, I can then sit exam and used the extra socket I put in as my nic example
Why has my thread been closed? Because people are arguing amongst themselves.... Can someone answer my last post?
I asked if I can just go in a sit the exam? And what book I need to revise from? I will take the day before off work to revise, I can then sit exam and used the extra socket I put in as my nic example
no better than the scams and fake `colleges` then....It doesn't matter - it's all about quantity of posts regardless of the quality ............. KERCHINGGGG .. and all that.
I bet the Staff forum is busy at the moment haha
Thomas out of interest what is your day job? Your IQ seems that low i can't actually seem to classify / envision you as anything.
Obviously your iq can't be very high otherwise you would of read my original post and seen that I stated I was a fork lift driver.
Any way, the fuse in my house keep blowing every couple of days, it's doing my head in as I have cut some old extension lead up so I can get the replacement cable to replace fuse. When I was in b and q last I notice a fuse board on offer. So if I swap it with this one ( shouldn't take long and it's I only have to swap the front over) this means that when my fuse blows I can just reset it?
Obviously your iq can't be very high otherwise you would of read my original post and seen that I stated I was a fork lift driver.
Any way, the fuse in my house keep blowing every couple of days, it's doing my head in as I have cut some old extension lead up so I can get the replacement cable to replace fuse. When I was in b and q last I notice a fuse board on offer. So if I swap it with this one ( shouldn't take long and it's I only have to swap the front over) this means that when my fuse blows I can just reset it?
Tell you what mate, you crack on down to B & Q hand over £50ish for your new dual RCD consumer unit without any clue as to what you're buying is appropriate for the situation and when you get it home just jog on and change it. If you end up injured don't come crying to us. If you end up dead tell your family not to come crying to us, if you do end up dead (which given the nonsense you spout is quite likely) then you may achieve post mortem stardom by featuring in an electrical safety ad. How about that for an X factor?Obviously your iq can't be very high otherwise you would of read my original post and seen that I stated I was a fork lift driver.
Any way, the fuse in my house keep blowing every couple of days, it's doing my head in as I have cut some old extension lead up so I can get the replacement cable to replace fuse. When I was in b and q last I notice a fuse board on offer. So if I swap it with this one ( shouldn't take long and it's I only have to swap the front over) this means that when my fuse blows I can just reset it?
i wonder who it`l be Mark...Wonder what the odds are on a pub member getting banned soon lol ...can't be that good considering the posts we get on this site, probably 2/1.
Careful Sintras on the prowl hehe
you were mildly amusing at the start. now you're just a boring tw*t.
Reply to Change of career in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.