Commercial building MK metal clad sockets

[catdog1121]

Hey guys,

So I have a community centre I do some work for, they are looking to replace all the sockets and switches, which is a load of them. They are currently metal sockets and switches, because its an old building most of the sockets are in the large skirting board, because of this I think it would be best to keep them as metal to protect from damage.

They are recessed in metal back boxes in the skirting, my preference of sockets etc is MK. Has anyone used MK metal clad sockets or switches on recessed back boxes? Do they fit? do they look ok?

 

[freddo]

I have an MK Metalclad 2 gang socket here and it fits standard wall boxes. Yes, I think it looks nice.

 

[freddo]

There can't be many other brands of metalclad stuff that can be used on a standard flushed in box.

 

[catdog1121]

Thanks for the reply, might have to buy one from screwfix and see what it looks like in situ. I know they come with the metal clad back box but still cheaper than some decorative socket.

 

[freddo]

Thanks for the reply, might have to buy one from screwfix and see what it looks like in situ. I know they come with the metal clad back box but still cheaper than some decorative socket.

Order them without the backbox, the MK stuff is almost always supplied with the box and accessory as separate parts from the wholesaler.

 

[freddo]

Also take a look at MK Albany Plus, available in a range of smart metal finishes if the metalclad grey paint isn't to your liking.

 

[Timbo]

Order them without the backbox, the MK stuff is almost always supplied with the box and accessory as separate parts from the wholesaler.

Part no. K2946 D5 ALM, the D5 is boxless.

https://www.tlc-direct.co.uk/Technical/DataSheets/MK/Metalclad_Socket_Outlets.pdf

 

[Flanders]

M2 are another make that you could use not sure on the quality, but maybe worth having at look at CEF sell them

 

[catdog1121]

M2 are another make that you could use not sure on the quality, but maybe worth having at look at CEF sell them

Thanks my nearest CEF is about 20mins away so I would prefer the idea if I needed to change a socket in the future I could just pop to screwfix which is like 50yrd from my house.

 

[Flanders]

https://www.NoLinkingToThis/p/lap-1...ainless-steel-with-white-inserts-5-pack/68831 You could use these, mind you they are made by LAP ?

 

[Dartlec]

https://www.NoLinkingToThis/p/lap-1...ainless-steel-with-white-inserts-5-pack/68831 You could use these, mind you they are made by LAP ?

I've used these a few times and they aren't actually too bad - they look nicer than a lot of metal sockets imo - I believe they are just rebadged BG stuff - whether that is a good or bad thing I'll leave for others to decide

 

[catdog1121]

https://www.NoLinkingToThis/p/lap-1...ainless-steel-with-white-inserts-5-pack/68831 You could use these, mind you they are made by LAP ?

Flat profile, no good. Plus I could have about 50 odd sockets to do, dont think I would trust LAP, nothing against them but some of the stuff I have used from them is a bit suspect.