Compex ex03 & ex04 multi choice exam help

[Tallan]

hi, recently sat my compex in Aberdeen and since found out that i had failed the multi choice exam, getting this email.

Unfortunately you were unsuccessful in the Ex03 & Ex04 units of the Multi-choice exam– see attached fail sheet.

It was much harder than I anticipated and am now worried about resitting it. Any hints/tips?

Cheers

 

[SparkyChick]

Welcome to the forums

I'll tag @ThatCompexDude and see if he has any helpful hints and tips. In the meantime, someone else may pop along and help.

Is it anything specific you want help with?

 

[jonny5]

Hi, I did the Compex a while back, however before hand, I attended the P&F Atex seminar, which is excellent especially as its free!

Training - https://www.pepperl-fuchs.com/great_britain/en/31374.htm

You get very good notes and the instructor is one of the best. Maybe if you can attend one, it will help with the theory.

Good luck!

Jonny

 

[Tallan]

Welcome to the forums

I'll tag @ThatCompexDude and see if he has any helpful hints and tips. In the meantime, someone else may pop along and help.

Is it anything specific you want help with?

I done the full week and thought I’d taken enough in. Worked through a few mock exams and nailed them. When it came to it, the questions were harder than I expected. The other guys said the same but I’m unsure how they got on.

Just any tips on what to do? Keep reading over my notes?

 

[Tallan]

Hi, I did the Compex a while back, however before hand, I attended the P&F Atex seminar, which is excellent especially as its free!

Training - https://www.pepperl-fuchs.com/great_britain/en/31374.htm

You get very good notes and the instructor is one of the best. Maybe if you can attend one, it will help with the theory.

Good luck!

Jonny

Thanks Jonny, unfortunately nothing in Scotland.

 

[jonny5]

Also had this book ... good pre-reading.

EEMUA Publication 186 - https://www.eemua.org/Products/Publications/Print/EEMUA-Publication-186.aspx

Expensive, but worth it.

I also printed out an Atex wall chart ... again, just to get used to the classifications, etc. Helped instil the classifications, etc.