Downlight hole converter

Discuss Downlight hole converter in the Electrical Tools and Products area at ElectriciansForums.net

Share this page

M

mjroe

-
Reaction score
7
Has anyone come across a downlight converter plate that is universal and accepts adjustable LED downlights?

I most likely going to need to change some old 4" - 5" spot downlighters in the next week and while I can find plenty of hole converter kits they all seem to be brand specific and all state they do not accept the adjustable type of downlighter (presumably because they are a larger diameter).

Any thoughts? I'd ideally like to use Aurora e8 adjustable downlights as replacements.
 
KSR do a converter plate for their QR range of integrated downlights. The tilt version has the same outside diameter of bezel as the fixed ones so I assume they will be compatible. The converter plate is 170mm in total.
 
Thanks Andy, however on the KSR website they state that they only fit their fixed downlights not the adjustable ones, maybe I'll have to phone on Monday...
 

Reply to Downlight hole converter in the Electrical Tools and Products area at ElectriciansForums.net

Share this page

Similar Threads

B
Sub panel install on older Crouse Hinds Board
I have an older Crouse Hinds board with a 200A service. Due to recent rehab on the house, I found I have the need to install a sub panel. I...
Replies
1
Views
1K
Megawatt
Megawatt
D
LED Downlights in kitchen
Hi, hopefully someone on here can help, I'm going crazy trying to figure this out. I have 5 x old lights in my kitchen, like old round mushroom...
Replies
11
Views
3K
IAmSparkytus!
I
D
Would these directional spotlights work?
Hi all. I know this is probably a stupid question but this isn’t my forte and I’d rather not waste £20 unnecessarily so thank you for any help. I...
Replies
1
Views
616
Lucien Nunes
Lucien Nunes
M
Anyone know a downlight to this spec?
Client has changed their mind after I've already cut 76mm holes for GU10 downlights. Now wants integrated fittings where they're difficult to...
Replies
3
Views
2K
Mattja
M
happysteve
What's the most badly designed accessory you've had to install?
What's the most badly designed accessory you've had to install? I present my nomination, the ML Accessories/Knightsbridge RWL5 wall-mounted LED...
    • Like
2
Replies
20
Views
2K
telectrix
telectrix

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock