Hi all, I have installed in my home a Voltage Optimiser. It has Chint breakers and a S9 Shunt Trip installed. I cannot find out any info on this thing. I'm looking for a diagram as I noticed it isn't working. I looked around it and found a loose neutral from the coil. I don't know where is goes and the S9 only has 1 cable in C1. any ideas please.
Discuss Eco Wurx VO Shunt Trip Wiring in the UK Electrical Forum area at ElectriciansForums.net
Reply to Eco Wurx VO Shunt Trip Wiring in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
BIG place OK lots of electrical bits.
but one on a 3 phase Radial is tripping its RCCB
so i check the wiring making sure its tight and it has...
Hey all, I'm looking for some advice to help me troubleshoot my strange issue with my consumer unit/fuse board on which my RCD keeps tripping...
I'm not sure what's going on with my kitchen light.
I've replaced an old 28W CFL fitting with a new 4 x LED GU10 fitting (a cheap one from...
Extremely low voltage on 120v line
Hi, I’m not an electrician but my home has 20 amp breaker that has only one outdoor outlet on it with a GFCI...
I'm encountering a problem with the lighting in my kitchen. I reside in an apartment that has a light fixture utilizing 2 T8 fluorescent bulbs...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
For Sale Wera KK Vde Interchange Screwdriver Set Slim *New*
- Latest: AngelLaHash
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.