- Reaction score
- 3,818
ThenR1+R2 values are required to be measured only.Full electrical Installation report.
Zs can be measured by a live test but I would expect the results to be that of a lower value than the calculated method of zs=ze+R1+R2
Discuss Electrical Test sheets & Fudged Figures in the Commercial Electrical Advice area at ElectriciansForums.net
ThenR1+R2 values are required to be measured only.Full electrical Installation report.
I'm going for a lie down in a dark room
Sorry Mate "you are not an Electrician" how do you know what you are checking is correct?I'm asking - do you think its fudged? Without me having to spend to send another body down to the job and get them to retest. Can anyone see ANYTHING suss about the test sheet I've just uploaded?
I am not an electrician in any shape of form, However I do check figures against what the lads send me on the low and what gets printed on a test sheet. Because I am certain both the CM/QS are pulling the wool over the company.
At the end of the day, I'm there to protect the company and the lads on site, So if I don't check these things then i'm as bad as they are.
those RCBO are very twitchy I often get figures like that but more like 22 @ 5 x. I think its very hard to believe that dado sockets (cct 8 and other rings) upstairs have an R1/R2 of 0.11 must be a circa 10m cct I would have thought more like 30m total giving approx 0.48. What distance does the circuit go to? And thinking about it what you said about the Zs = Ze + R1/R2 is so spot on in every case it looks like its calculated. They could have faked it better by varying the figures.RCD test result times
Sorry Mate "you are not an Electrician" how do you know what you are checking is correct?
The R1+R2 for the ringame finals are incorrect and the Zs for these circuits don't tally with the continuity readings
Reply to Electrical Test sheets & Fudged Figures in the Commercial Electrical Advice area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.