I have a Toyota 4A engine to put into a Mitsubishi Galant. How do I wire the engine to the Mitsubishi. I'm using the 4A Wire loom and computer. How do I power the computer from the galant loom
-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
- Thread starter webstertraille
- Start date
- Replies 0
- Views 1K
Discuss Engine and body swap in the Auto Electrician Forum area at ElectriciansForums.net
Reply to Engine and body swap in the Auto Electrician Forum area at ElectriciansForums.net
Similar Threads
Hi, I have a ‘05 Megane ii 2.0 with a f4r, and I was wondering if anyone has any info regarding wiring a bee r rev limiter up to them
I only need...
- KarsBadg
- Auto Electrician Forum
- 0
- 273
It's already the top spec model. Being a Dacia I think they were all fitted with a single tone horn. I'll have a look at what Amp rating some of...
- Polywobblydriver
- Auto Electrician Forum
- 5
- 312
Don't worry about the 4A fuse, it's a Keston boiler, it'll be dead by the time you've found one and it's been delivered.
- Simon47
- Talk Electrician
- 10
- 741
ESP - https://www.espuk.com/# is the company you are referring to part of Scolmore
- Nelly72
- UK Electrical Forum
- 2
- 288
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
It's Fridayyy...That sounds like a good mindset to have, celebrating the little victories in the week. Enjoy...
- Latest: Astrobpy
-
Lighting control system optionsSo, you've got all (or ccts in questions, anyway) the lighting outlets wired as single radials...- Latest: Rockingit
-
Getting power of the light wiringThank you all for your replies and suggestions. I will try to follow up on each one and find a...
- Latest: DIYElec
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.