- Reaction score
- 4,648
We use the Curve boards from the local Denmans, cheap and cheerful, plenty of room to work etc. We used MK for a bit when the AM3 boards appeared but soon found they were useless. Faulty RCBOs, no terminals for bonding conductors, recalls and so on. If we do a CU change it will almost always be all RCBOs. All fine stranded conductors have ferrules fitted if we have to cut the factory fitted one off.
Part of remedial works after a T+I today included fitting ferrules to fine stranded conductors, it was shocking to see how few strands were connected on various RCBO tails, YY and SY flexes and tri rated singles that are used in a lot of the conduits. I must have fitted thousands of ferrules in the past few years. Makes a far superior connection IMO.
Part of remedial works after a T+I today included fitting ferrules to fine stranded conductors, it was shocking to see how few strands were connected on various RCBO tails, YY and SY flexes and tri rated singles that are used in a lot of the conduits. I must have fitted thousands of ferrules in the past few years. Makes a far superior connection IMO.