HDMI re-terminating - Broken connector

Rob Taylor · May 10, 2016

hdmi's sunk in wall. Whilst customer put TV on the wall, with hdmi's connected, they moved TV too far out and pulled the crimps out of the connector. Cheap hdmi's!!!
anyone know if they can be reterminated??? near camberley, Surrey if anyone can do it?!

Richard Burns · May 11, 2016

Are you handy with a soldering iron?!:66:

davesparks · May 11, 2016

Easy peasy, buy a connector and solder it on, just a little belling out to identify what goes where.

I'm in the area if you come unstuck, just drop me a PM

Sent from my iPad using Tapatalk

Rob Taylor · May 13, 2016

Thanks for your help guys, father in law used to do military grade so will get him on it if I struggle. Didn't want to splice and haven't seen the soldered connectors. Will have a look.
cheers Dave will let you know if struggling

Rob Taylor · May 13, 2016

Richard Burns said:
Are you handy with a soldering iron?!:66:
View attachment 32161

know any suppliers or is it an eBay job?

Simlec · May 13, 2016

IKON - EP-HDMI50-ST - MODULE, HDMI, SCREW TERMINALS | Premier Farnell CPC UK

go with screw terminal as it's very hard to solder HDMI if you have never done it before.

Richard Burns · May 13, 2016

My link on the word You is to rapid electronics.
At least with screw terminals if they do it again it is an easy repair!

davesparks · May 13, 2016

Rob Taylor said:
Thanks for your help guys, father in law used to do military grade so will get him on it if I struggle. Didn't want to splice and haven't seen the soldered connectors. Will have a look.
cheers Dave will let you know if struggling

No worries, I have finally been reunited with my good soldering iron today after someone borrowed it for five minutes about six months ago