Currently reading:
How do I get this open?

Discuss How do I get this open? in the UK Electrical Forum area at ElectriciansForums.net

Reaction score
3
So I have a replacement underfloor heating actuator that needs fitting and wiring up. I am told (by the supplier) that a homeowner can fit this by wiring the cable in to the appropriate terminals in the junction box. It's a replacement, so I can easily trace the wires back to where the existing ones go.

The wires pass through the junction box on the left into the one on the right. The one on the right is easy - it has screws. But how do I open the one on the left. No screws, clips or obvious way of opening it. Possibly some sort of snap fit?

Does anyone have any suggestions?

Thanks

John

20221001_174924~2.jpg
 
Is there a screw on the bottom edge?

Actually, it looks like a bit of pvc trunking… the lid should clip on. Measure across the width… is it 100mm?

Can we get a photo showing the side view?
Ah, this is really useful. I've double checked there are no screws on the lower edge. It is exactly 100mm width and as shown in this pic from the side there's a groove along the length, suggesting it should be possible to separate and detach it. I'll try it and see.

Many thanks
John
20221003_202652.jpg
 

Reply to How do I get this open? in the UK Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top