lighting control

[i=p/u]

Anyone help me, I have an old 4 pin time clock, a day/night sensor and a hand/off/auto 3 way switch...

Dont no how to wire it......

Cheers if u can help or explain/talk through it.. Thx

 

[Richard Burns]

.......

 

[davesparks]

*time-switch

 

[Knobhead]

Hand / off / auto to me says just that.
Hand turns the lights on at any time.
Off is off.
Auto selects both the other controls.

So which is it?

 

[i=p/u]

whys the blue at bottom sleeved brown AND NOT BROWN

 

[tazz]

Because Richard is showing T&E, and thus switched blue cable needs to be sleeved......Unless you want to run it all in singles.

 

[infinity]

Done it in T&E Before, just make sure you wire the lights and the PIR back to the switch separately, then it's easy