i=p/u - Arms Reaction score 801 Sep 3, 2014 #1 Anyone help me, I have an old 4 pin time clock, a day/night sensor and a hand/off/auto 3 way switch... Dont no how to wire it...... Cheers if u can help or explain/talk through it.. Thx
Anyone help me, I have an old 4 pin time clock, a day/night sensor and a hand/off/auto 3 way switch... Dont no how to wire it...... Cheers if u can help or explain/talk through it.. Thx
K Knobhead Sep 3, 2014 #4 Hand / off / auto to me says just that. Hand turns the lights on at any time. Off is off. Auto selects both the other controls. So which is it?
Hand / off / auto to me says just that. Hand turns the lights on at any time. Off is off. Auto selects both the other controls. So which is it?
OP i=p/u - Arms Reaction score 801 Sep 29, 2014 #5 whys the blue at bottom sleeved brown AND NOT BROWN
tazz - Mentor Arms Reaction score 2,524 Sep 29, 2014 #6 Because Richard is showing T&E, and thus switched blue cable needs to be sleeved......Unless you want to run it all in singles.
Because Richard is showing T&E, and thus switched blue cable needs to be sleeved......Unless you want to run it all in singles.
infinity - Reaction score 214 Sep 29, 2014 #7 Done it in T&E Before, just make sure you wire the lights and the PIR back to the switch separately, then it's easy
Done it in T&E Before, just make sure you wire the lights and the PIR back to the switch separately, then it's easy