Guest viewing limit reached
  • You have reached the maximum number of guest views allowed
  • Please register below to remove this limitation

Zdb

-
I don't suppose anyone has put together a spreadsheet with a table of torque settings for popular/common brands/devices?

Hoping to save some time if it's already been done and shared here


Many thanks
 
TBH you're better off checking up to date manufacturers information as things do change. A generic crib sheet off the net will never be updated and you would need to check for accuracy.

Had an instance a few years ago where the manufacturer originally stated 2Nm for their MCBs, NADER IIRC, but after a small fire they increased the setting to around 5Nm.
 
There’s normally a sticker inside “quality” consumer units with torque settings for mainswitch, mcb, rcbo neutral bar etc.....

from memory, mcb are 2.5, bars are 3.5???

which is fine, but my torque Wiha has marked numbers of 2.2, 2.4, 2.6 etc.
I need to set it half way between marks to get a point 5
 
This is one that is floating around the web. Not my work but gives a good base
Thanks. I notice that Schneider and Eaton were missing so I have attached them below for anyone that might find it useful
 

Attachments

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread starter

Zdb

-
Joined
Location
UK
If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
United Kingdom
What type of forum member are you?
Electrical Engineer (Qualified)

Thread Information

Title
List of torque settings
Prefix
N/A
Forum
UK Electrical Forum
Start date
Last reply date
Replies
7
Unsolved
--

Advert

Thread statistics

Created
Zdb,
Last reply from
nicebutdim,
Replies
7
Views
13,053

Advert

Back
Top