F
fingz999
ive been looking at the lct204w pack from makita comes with the impact driver and a drill but is drill any good ive been using the dewalt 12v impact and its great started looking around for one for myself and saw this the impact driver even though its only 10.8v i would have thought will be fine but im not so sure on the drill is it anygood or should i just buy a seperate impact driver and buy a new drill in the future?
not were i was going to buy it from but has the specs
LCT204W DF330D TD090D:MAKITA-MAKITA LCT204W 2 Piece Kit DF330DWE + TD090D
or my other option i have coem accross is the makita 14.4v tripple pack which has 3 x 1.3ah nicad batteries plus
Makita 6280DWPE3 14.4V 2-Speed Drill Driver
- 2 mechanical gears
- forward and reverse
- variable speed
- electric brake
- max in steel 10mm
- max in wood 25mm
- torque settings 32; 20/36
- max size wood screw no.14
- no load speed hi 0-1200rpm low 0-350rpm
- charging time 30mins
- net weight 1.6kg
Makita 8280DZ 14.4V Combi Drill
- variable speed trigger
- forward & reverse action
- electronic brake
- keyless chuck
- max capacity - 10mm steel / 25mm wood / 10mm masonry
- No.12 max wood screw size
- 16 stage variable torque
- 20/36Nm torque (S/H)
- 0-350rpm / 0-1,200rpm no load speed (Hi/Lo)
- 30min charging time
- weight 1.7kg
Makita 6935FDZ 14.4V Impact Driver
- charging time 1 hour
- machine screw M4-M8
- standard bolt M5-M12
- max torque 140Nm
- no load speed 0-2,600rpm
- impacts per minute 3,200ipm
- weight 1.6kg
not were i was going to buy it from but has the specs
LCT204W DF330D TD090D:MAKITA-MAKITA LCT204W 2 Piece Kit DF330DWE + TD090D
or my other option i have coem accross is the makita 14.4v tripple pack which has 3 x 1.3ah nicad batteries plus
Makita 6280DWPE3 14.4V 2-Speed Drill Driver
- 2 mechanical gears
- forward and reverse
- variable speed
- electric brake
- max in steel 10mm
- max in wood 25mm
- torque settings 32; 20/36
- max size wood screw no.14
- no load speed hi 0-1200rpm low 0-350rpm
- charging time 30mins
- net weight 1.6kg
Makita 8280DZ 14.4V Combi Drill
- variable speed trigger
- forward & reverse action
- electronic brake
- keyless chuck
- max capacity - 10mm steel / 25mm wood / 10mm masonry
- No.12 max wood screw size
- 16 stage variable torque
- 20/36Nm torque (S/H)
- 0-350rpm / 0-1,200rpm no load speed (Hi/Lo)
- 30min charging time
- weight 1.7kg
Makita 6935FDZ 14.4V Impact Driver
- charging time 1 hour
- machine screw M4-M8
- standard bolt M5-M12
- max torque 140Nm
- no load speed 0-2,600rpm
- impacts per minute 3,200ipm
- weight 1.6kg
Last edited by a moderator: