Discuss metal light fitting with no earth in the UK Electrical Forum area at ElectriciansForums.net

Sorry guys it won't let me post pic. Basically its a ceiling rose cover with 6 hollow bolts going into the sides with a nut securing it. All the arms of the pakistani chandelier are metal so I rekon only one bolt needs earthing as all arms are connected so will have continuity. Correct if I'm wrong?
 
Not having the benefit of seeing it, if its from Pakistan its probably crap, so just drill a hole in it and bond it with 10mm nut and bolt and nice shiny 4mm yellow green cable and nice shiny steel lug. Top job, nice and safe.

I once had a similar problem with some eyesore a bloke brought back from Sri Lanka, and he wanted it in his bathroom!.......dream on:yesnod:
 
I'd probably go with a ring crimp as well; securely attach it to wherever you can, otherwise you might have to make your own hole, then obviously test continuity.

Of course it all depends on the construction of the fitting. On my last job we had these metal light fittings going in the bathrooms. They were metal and didn't have any means of earthing so we were instructed to modify the fitting to include an earth. I pointed out they were ELV so probably shouldn't be earthed, but I was told to stop arguing and get on with it. :rolleyes2:
 
I'd love to supply a pic but as op says I havnt seen them and if I did I still can't upload pics via the mobile app (can't even view other images via mobile app either)
Cheers Richard they look like they'll do the trick I think.
Thanks everyone else. If they can't be done maybe I'll tell him to use them as marracas? Lol

the mobile app is crap download tapatalk app
 

Reply to metal light fitting with no earth in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Old two core cable in a lighting circuit with no cpc at any point All points had metal fixtures and fittings class1 At two points the live loop...
Replies
0
Views
645
Hi, the new lights I have are metal and the earth connection doesn't connect to anything. I noticed the light that was there before someone had...
Replies
4
Views
1K
I have had these lights installed by a contractor whose work is normally very good. He has not connected the earth in each fitting as there is a...
Replies
37
Views
2K
Hi, I do basic electrical DIY like changing light fittings and have got a light to put up that only has a fly earth and no flex earth (see pic)...
Replies
1
Views
633
I'm working on a system that has been installed incorrectly. It's a 3ph Hager board with 8 swa cables glanded into the bottom entry panel. The...
Replies
28
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock