Basiluk
-
- Reaction score
- 0
I am after a device that will allow remote (WiFI or other radio signal) monitoring of the on / off state remotely.
It will be outside so preferably needs to be IP65 etc. Cannot use a clamp divide because this is a consumer 3 wire plug/cable that needs monitoring. I need to be alerted when it goes on or off - a relay driver driving a flashing lamp will do. I do not need to monitor current or total usage.
I need to do this over 5-6 sockets/13amp feeds to various devices, water pumps etc. I know that I can use home automation type sockets to do this. but was after a better solution - Anyone have any recommendations please?
It will be outside so preferably needs to be IP65 etc. Cannot use a clamp divide because this is a consumer 3 wire plug/cable that needs monitoring. I need to be alerted when it goes on or off - a relay driver driving a flashing lamp will do. I do not need to monitor current or total usage.
I need to do this over 5-6 sockets/13amp feeds to various devices, water pumps etc. I know that I can use home automation type sockets to do this. but was after a better solution - Anyone have any recommendations please?