L
lecnoob
Is there any way to break open your average pre-fabbed cable connector tip in such a way that you could re-use it? I'd like to replace the end of a DC cable without just chopping the end off ...
Discuss Opening factory-sealed cable tips in the Australia area at ElectriciansForums.net
Share this page
Reply to Opening factory-sealed cable tips in the Australia area at ElectriciansForums.net
Share this page
Similar Threads
Have a bunch of home automation in place, and am considering installation of a Shelly into a light switch to remotely control some lights...
I purchased a house that has a really cool 12v halogen setup where two wires are suspended across the ceiling in two different locations, and each...
On eBay you can find hundreds of Samsung (but also LG, Philips, etc.) Smart TV motherboards (see e.g. here Samsung UN65JU6700FXZA Main Board...
Hello.
Is it allowed to turn a 1.3" (34mm) thick 4-core (neutral and 3 phase) cable that is 7" (18cm) long, including outer insulation, at the...
We are in the process of renovating our house, and would like to setup led strip-lighting throughout. of the options, this seems most attractive...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.