Passed my AM2 - Ask me anything !!

[telectrix]

Spend your time playing monopoly
View attachment 93255

I got a few of these:

jailer's a Scouser too and can be bribed with a case of Stella. Governor's a bit more trickey. needs a season ticket for the Kop End.

 

[Ashfoster96]

Recently passed my AM2 exam first time. Ask me any questions and I’ll be happy to answer them !

Hi jack, I have my AM2 fault finding resit coming up, my testing itself is done it’s just the writing to go along with it, any advice please??

 

[Raybaz]

Recently passed my AM2 exam first time. Ask me any questions and I’ll be happy to answer them !

Hi jack dis you have to set overload for motor if so how did you do it did you do a equation or just set it the amp of the motor?

 

[Official3LK]

Recently passed my AM2 exam first time. Ask me any questions and I’ll be happy to answer them !

I failed Insulation Resistance for whatever reason, I tested circuits separately, switched off spurs, removed loads and tester at 500v...

Only i might hve done different was testing ring. I wago one leg (L,N,E separately) and tested from other leg...

How did you test RIng?

 

[Hariskhan1]

Recently passed my AM2 exam first time. Ask me any questions and I’ll be happy to answer them !

Broooo the anxiety man. I need to redo fault finding inspection and testing safe isolation so rip I'm done and swa and sy

 

[Willis]

Recently passed my AM2 exam first time. Ask me any questions and I’ll be happy to answer them !

Hi Jack,

Congratulations!

I am scared by the Risk Assessment, could you give me some tips how to come across it.

Many thanks.
Willis

 

[Megawatt]

Recently passed my AM2 exam first time. Ask me any questions and I’ll be happy to answer them !

I have to agree with Littlespark saying all a school does is put you in the position to learn. Great job

 

[Aaron b]

Hi Jack,

Congratulations!

I am scared by the Risk Assessment, could you give me some tips how to come across it.

Many thanks.
Willis

It's a very simple risk assessment and is partially populated. The first column has things like slip trips and falls, you then state the activity such as using a platform or trailing leads, the risk rating, who's affected and what you will do to control it. You then write the new lower risk value. Risk is severity x likelihood.

You will have plenty of time and I found the examiner willing to help.

This video should give you some tips

 

[oscar21]

All I can say is thank god I've got "grandfather rights" with NAPIT. My only qualifications are 16th, 17th and 18th along with 2391 from 1999. I cant imagine going through all that faff with AM2 just for the privilege of fitting a couple of sockets in mrs miggins front room. Domestic work could suddenly get very very expensive as people like me start to retire if part P continues to up the anti like its doing.

 

[Aaron b]

All I can say is thank god I've got "grandfather rights" with NAPIT. My only qualifications are 16th, 17th and 18th along with 2391 from 1999. I cant imagine going through all that faff with AM2 just for the privilege of fitting a couple of sockets in mrs miggins front room. Domestic work could suddenly get very very expensive as people like me start to retire if part P continues to up the anti like its doing.

I think that's the idea and I don't see why it's different to gas safe. I see lots of adverts for 'electricians' that also clean gutters. The industry needs better regulation but I don't agree with some of the AM2.

 

[Lister1987]

Hi Jack,

Congratulations!

I am scared by the Risk Assessment, could you give me some tips how to come across it.

Many thanks.
Willis

Give this a mooch - Risk assessment: Template and examples - HSE - https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm