Discuss Problem with my hobs = ( in the UK Electrical Forum area at ElectriciansForums.net

Holyhead, north wales

if its an induction hob have you tried switching it off and counting to 10 then switching it back on , they can be a right pain some times , if you would like me to pop over send me your address and contact details i may well be in your area late tomorow afternoon
 
Right just looked it up the B12B is a ceramic hob so its not the pans , by what you are describing it could be a loose connection , with Beaumatic hobs as well as others they have some little links where the cable connects if these are missing it could well be the cause , or the connections on these links are loose , these hobs are designed for single and three phase use hence the links , on problem is these hobs have been discontinued by Beumatic still part should be available if required , check the links are in place
 
right just opened it up and the previous owner had wired it up wrong the neutral wire was connected to a pin that wasn't in use. all sorted many thanks for help and the abuse!
 
wouldn't call any of it abuse, more like friendly banter. anyway, glad you got it sorted.
 
especially now, you can slope off down to the pub, knowing that she can get on with sunday dinner, ready for when you stagger back.
 
right just opened it up and the previous owner had wired it up wrong the neutral wire was connected to a pin that wasn't in use. all sorted many thanks for help and the abuse!

"Drat",just missed this thread.
I know little about induction hobs, but I could have helped with the abuse part

The abuse you were given seemed non existent, a poor standard of abuse indeed compared to what I am capable of


Just as well he had suggestions given about the cooker problem to compensate
 

Reply to Problem with my hobs = ( in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi all, we had our gas hob removed months ago and finally just got round to putting an induction hob in. Its a normal 4 ring induction but one of...
Replies
3
Views
753
I'll start by saying - I have absolutely no intention of doing any wiring or anything electrical myself. You get someone professional to do a...
Replies
8
Views
755
Hi, We’re having problems with our Bosch serie 6 washer/dryer. It’s about 6 years old. The model number is WVG30461GB/03. It has begun to stop...
Replies
0
Views
377
Hello everyone In September 2023 I rented a beautiful 3 bedroom apartment, with all electric supply, no gas powered appliances. I noted down the...
Replies
16
Views
2K
m having a bit of an issue that is proving difficult to resolve. For 2 years I have been having no problems with my setup. I have a 3 zone house...
Replies
1
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock