Discuss Query about bathroom light? in the Canada area at ElectriciansForums.net

K

KFORDHUNTER

I have got a job on changing a bathroom light, basically like for like, under the 17th regs can you do this, i haven't been round yet but if the bonding is inadequate and there is no rcd protection can you do like for like in special location or do you have to insist the installation is upgraded. I know that if it is inadequate i will inform him of this and recommend upgrade.
 
I have got a job on changing a bathroom light, basically like for like, under the 17th regs can you do this, i haven't been round yet but if the bonding is inadequate and there is no rcd protection can you do like for like in special location or do you have to insist the installation is upgraded. I know that if it is inadequate i will inform him of this and recommend upgrade.

you would have to comply with the 17th, so the light should be on an RCD
 
Cheers, so basically in a special location you have to make sure the installation complies with all new regs before you can undertake any work, i presume in say a bedroom you can just change a light.
 
Cheers, so basically in a special location you have to make sure the installation complies with all new regs before you can undertake any work, i presume in say a bedroom you can just change a light.

the rules apply everywhere, if you worked on a beddroom light, and the switch drops were buried etc etc, then arguably that should be on an RCD as well, although you cold equally argue that because you are not actually installing the switch drops, then it wont apply

ho hum!!!:p
 

Reply to Query about bathroom light? in the Canada area at ElectriciansForums.net

Similar Threads

I have 16 ceiling spots to be replaced in a room being repurposed as a bathroom. Some will be over a shower, basin and bath hence need to be IP65...
Replies
19
Views
953
I need your help please once again in tracing a fault. Am DIY but not clueless. Converting former kitchen into 2 rooms: bathroom and laundry. The...
Replies
24
Views
2K
I have a socket in by bathroom vanity unit, .75m away from the edge of the bath. The vanity is completely enclosed with a sink on top and doors...
Replies
23
Views
2K
My extractor fan has given up the ghost this week and I was hoping to replace it myself, however I cannot do a like for like swap as the current...
Replies
1
Views
1K
Hi, I've just had some electrical work completed in the bathroom; I've recently refurbished the bathroom, replacing the old electric shower with...
Replies
39
Views
8K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock