- Aug 28, 2022
- 4
- 0
- 31
- If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
- United Kingdom
- What type of forum member are you?
- DIY or Homeowner (Perhaps seeking pro advice, or an electrician)
In the bathroom we have a panel above the wash basin with 3 x 12v Halogen downlighters powered through a single transformer.
I am looking to replace the halogens with LED equivalents with a 12v LED driver.
I have removed the bezel and there is a very thin black plastic ring but I can see no retaining screws. I removed the top cover expecting to find it was held in place by clips - but there are none. How do I remove the fittings without damaging the board? It is a 60mm cutout. I attach pics, both top and bottom.
Can anyone advise me, please?
I am looking to replace the halogens with LED equivalents with a 12v LED driver.
I have removed the bezel and there is a very thin black plastic ring but I can see no retaining screws. I removed the top cover expecting to find it was held in place by clips - but there are none. How do I remove the fittings without damaging the board? It is a 60mm cutout. I attach pics, both top and bottom.
Can anyone advise me, please?
