**Show Us Your Installs!!!**

[Darkwood]

thnkyou for the grown up debate darkwood.

I agree with the sentiment of your post, and the standard of which you are promoting, i just dont think 514.1.2 asks for it, and with the old system a simple domestic fuseboard with no cable markers would or should have attracted a code 4. i think i will just agree to disagree with you. And i have no pictures to show :smiley2:

We see each others side that i agree and on that note Id agree to disagree as i see we both hold strong slightly differing opinions that arises from the often debated topic of regulation interpretation - at the end of the day it aint going to burn the house down and anyone in the board should be competent to be there so minimal risk to health if they know their job, as for me I routinely ID all cables in DB's regardless of requirements and nature of the building .....probably a trait of my panel building where ID is essential.

 

[Engineer54]

View attachment 24119
QUOTE]


I hope those SWA cables with the coloured tape markings, entering the side of that DB aren't single core jobbies?? !!!! lol!!

 

[Darkwood]

View attachment 24119
QUOTE]


I hope those SWA cables with the coloured tape markings, entering the side of that DB aren't single core jobbies?? !!!! lol!!

Your Sherlock skills need a polish Eng54 ... you can follow the cores up to the top 3 mcb's like I'd do that anyway lol

 

[ipf]

Your Sherlock skills need a polish Tel ... you can follow the cores up to the top 3 mcb's like I'd do that anyway lol

Tel ? Bit obvious that dark. Think he's referring to the markings on the swa's, even if they are a mixture of old and new colours.lol.

 

[Darkwood]

Tel ? Bit obvious that dark. Think he's referring to the markings on the swa's, even if they are a mixture of old and new colours.lol.

Yep got Tels post i just read on another thread in my head lol... tape is random marking as they all come out of floor same place its a highly technical ID system

 

[Engineer54]

Your Sherlock skills need a polish Eng54 ... you can follow the cores up to the top 3 mcb's like I'd do that anyway lol

It was a tongue in cheek comment, and yes i did see where the cores were going!! lol!!

 

[ipf]

2010/11, before and during work.

 

[ipf]

Outside compactor unit and one db

 

[Stroppy]

Not my install, but I found this novelty clothes rack made of 20mm conduit parts in the attic of a house!

Some of the joints weren't brilliant....

 

[Robotstar5]

Could be a market for them?, you can even flat-pack them for posting.