Discuss Stuck with 2365 L2 and L3 and 17th editon in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

P

Pango

I did 2365 L2 and L3 last year and also done 17th Edition. i have about a 1 year experience working on commercial sites. I am stuck as to how to progress from here as i have discovered its not as straight forward as other professions. My main question is, it possible to register for Part P and what kind of ECS card can i apply for? What do i need to be self employed ? Any ideas please...,
 
With your 2365 and 17th edition you can gain access to a Part P scheme now, I have spoken to Stroma and all they require is a Level 3 qualification (2365 is acceptable), public liabilities insurance, evidence of experience and two new circuits you have recently installed to be inspected by one of their site inspectors. The list is as below from their website, you do not need commercial or PAT qualifications if you are only undertaking domestic work.


  • Relevant qualifications for domestic, commercial and PAT work
  • Calibration certificates for your instruments
  • Public liability insurance for £2million
  • Professional indemnity insurance for £250K (if carrying out conditioning reports)
  • Electricity at Work Regulations 1989
  • Wiring Regulations BS 7671
  • On-Site Guide BS 7671
  • Your CV
  • 2 Passport size photographs


You can currently get an ECS Trainee Card, to qualify for the gold card you would need to convert the 2365 to an NVQ level 3 via the 2357 NVQ conversion unit and completion of an AM2.
 
I did 2365 L2 and L3 last year and also done 17th Edition. i have about a 1 year experience working on commercial sites. I am stuck as to how to progress from here as i have discovered its not as straight forward as other professions. My main question is, it possible to register for Part P and what kind of ECS card can i apply for? What do i need to be self employed ? Any ideas please...,


Have you got NVQ3?

Only some domestic work is notifiable.



• the installation of a new circuit, whether at low voltage (typically 230 V) or extra-low voltage); or
• the replacement of a consumer unit (fusebox); or
• any alteration or addition to an existing circuit in a special location*, whether at low voltage (typically 230 V) or extra-low voltage.

:)
 

Reply to Stuck with 2365 L2 and L3 and 17th editon in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock