Swa cutter

[pennywise]

This is the saw I use don't need to worry about going too deep just set the depth of the blade and off you go. It's about half way down called an armour saw

Insulated Cutting Tools, Insulated Saws and Insulated Knives | ITL Insulated Tools LLC

 

[johnboy6083]

either is good!

 

[Guest123]

This is the saw I use don't need to worry about going too deep just set the depth of the blade and off you go. It's about half way down called an armour saw

Insulated Cutting Tools, Insulated Saws and Insulated Knives | ITL Insulated Tools LLC

How much was that there armour saw then???

 

[pennywise]

How much was that there armour saw then???

Errrmm £60, overpriced but it works great. The only reason I can see as to why they are so expensive is that ITL supply tools to local DNO who probably don't care how much they pay as long as it comes with a kite mark or BS number.

 

[Guest123]

Errrmm £60, overpriced but it works great. The only reason I can see as to why they are so expensive is that ITL supply tools to local DNO who probably don't care how much they pay as long as it comes with a kite mark or BS number.

Do you know what, I'm getting the biggest feeling of deja vu here....I'm sure we've had this conversation before.......

 

[pennywise]

Do you know what, I'm getting the biggest feeling of deja vu here....I'm sure we've had this conversation before.......

same!! I'm going senile lol

 

[High Tower]

same!! I'm going senile lol

No u bloody dont!! your younger than me!!

 

[pennywise]

No u bloody dont!! your younger than me!!

I know Lol but I feel like it sometimes, you should see me onsite with mee note book have to make entries as to when to breath

 

[Roger]

Fancy one of those SACS tool,bit pricey though.Is it all metal construction ?

Those yellow Kewtech ones are rubbish currently using hacksaw and getting quicker.

 

[ash_s3]

KewTech do a large one aswell, the small ones are okay, saves time and gives a perfect cut, just dont buy the proper spare blades for them as they cost an arm and a leg! just get a pack of junior hacksaw blades, cut one down to size and you can replace the blade in the kewtech tool.