I have recently replaced the DB in a house I completed the installation test on the new board but client also wanted the off peak board tested. Would I need to do a EICR for off board or include test results as part of installation certificate. If it is included what is classed as the main switch as there is 2 boards. Thanks
Discuss Testing in the UK Electrical Forum area at ElectriciansForums.net
Share this page
- Reaction score
- 5,382
do a seperate EIC for the board on econ7
and whilst your at it can you please re-issue the client with an EIC for the works you have carried out....
such as the dis-board change....
and whilst your at it can you please re-issue the client with an EIC for the works you have carried out....
such as the dis-board change....
T
Tridentsystems
He said he's doing an installation cert. eicr for e7 board should do if alls you have done is tested it.
- Reaction score
- 5,382
M
MDJ
If it is an existing board and you have not touched it in any way, and the client wants a condition report then yes crack on.
Reply to Testing in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
In my line of work it's very rare that I ever have to change a DB. I'm largely in maintenance; occasionally have to add new circuits etc. so in...
Hi guys, could someone help with the following please? The scenario is:
Domestic property supplied via three phase (with a 3P main DB, NO SPD)...
Hi all,
Merry Christmas to everyone, and apologies for talking work during the holidays😅
I have my first EV charger install job early in the New...
Hello fellow sparks,
I’m looking to do my testing and inspection course which starts on the 30th of April, but I have not got much testing...
Hi all,
I've installed a Tesla Gen 3 wall charger supplied by my client.
For your information, the place that I installed is in a block of flat...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Is it possible to put a 16mm swa on a 40a mcb protected by an rcd
- Latest: brianmoooore
-
-
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.