I’m sure this is simple, but it’s confusing me for some reason. I have a line wire coming into a bathroom that used to go to a lighted medicine cabinet. I also have a load wire coming into the same area from a small vent fan that I installed (It’s not powered yet). In place of the old lighted medicine cabinet I now have an LED mirror. So I need to power the mirror and also power a switch for the vent fan, it would be even better if I could have the switch be a switch/ receptacle combo as there is only one other receptacle in the bathroom. Can some give me some advice on how best to wire this? TIA
Discuss Wiring plan for bathroom mirror and fan? in the DIY Electrical Advice area at ElectriciansForums.net
Reply to Wiring plan for bathroom mirror and fan? in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
I recently bought a bathroom mirror with LED & Bluetooth speakers (from Amazon). There is a double isolated symbol on the back of the mirror yet...
Hi All
I have recently had a new bathroom mirror installed with a built in LED and Demister that is turned on using a motion sensor.
The mirror...
HI There,
I would be grateful if you could help me, I have a very long duct between the bathroom and extractor outlet vent and for sometime, the...
I've installed a replacement bathroom extractor fan. Pic on the left is the old one. Pic on right is the new one. Wired the same way but the fan...
Need to replace an old Vent-Axia extractor fan as the pull chord no longer works.
I bought this -...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
Will the mini (or larger) RCBO fir in the this starbreaker board?- Latest: HappyHippyDad
-
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.