Hello all,
I have an odd problem here and I am at a loss.
I'm replacing a light fixture and dimmer switch on our dining room circuit. The problem I'm having is that both boxes only have one cable in them. (one black, white and ground).
When I turn the breaker back on and use my tester...
My parents have a small well house covering a tank and well pump. The house and well house were built in the 1960s and the pump/control panel is fed by a single electrical cable with 2 hots and a ground. They live in middle GA so it does not get very cold but does occasionally dip below...
I bought and wired a simple Home Depot three led bulb chandelier. White black and copper wire. Wires connected. Turned fuse back on and light bulb came on but the wall switch will not turn the light off. Any thoughts?? Tried every switch around ( new house with no previous fixture as...
This doesn't make sense to me. Replacing this light for a friend...from the light switch the live romex cable has BOTH neutral and hot connected together, with hot coming from the light fixture to complete. And the neutral from the fixture connected with the ground. I've never swapped something...
Hey electricians. Apologies for jumping on a question first round in but this LED light fixture is driving me slightly insane.
It has a dimming/color temperature changing driver that also runs bluetooth via a remote.
Driver IN has 3 wires:
White - Neutral
1 Blue, 1 brownishpurple - Both...
I'm a single woman. ;-)
I live in an apartment. A few weeks ago the kitchen ceiling light fixture started flickering. I found out by accident that if I turned on the switch next to the kitchen switch (breakfast room) that the flickering stopped. The maintenance guy came out & spent a long time...
I have a fan light fixture which I wired more than a year ago. It has three dimmable LED light bulbs on the bottom which recently started exhibiting strange behavior. Last week the lights started dimming and brightening on a regular cycle, roughly every 5 seconds. The lights will start our...
electricalhome
Thread
fixture
fluctuating
home
led's
light
lights
voltage
I've got two black wires coming out of a junction box that I want to wire a light fixture to. One black wire has white tape on it. It always has voltage to ground so I think I can assume that's my 'L' or 'hot'. I've tried connecting these two wires to my light fixture wires (and the ground to...
Hello all,
I'm hoping the experts can help answer a question for me...
I need a new plug in light fixture over a work bench in my garage. I have a box of T12 bulbs because all my existing fixtures are T12 Fluorescent.
It's nearly impossible to find a T12 fluorescent fixture, let alone a plug...
Installing light fixture with one black and one white to ceiling wires of 2 black and 2 white. One set of black and white wires are hot other is not. Only one switch that's not hot when tested. 120V How do I wire?
Sandra Walker
Thread
black
ceiling
fixture
installed
light
old
screwfix
test
wires
wiring
I am hoping to buy an antique (1929) plafonnier or hanging light fixture.
It has not been rewired since it was first made and, despite living in France for over 40 years, I don't have the faintest idea where I could get it rewired and the equivalent of PAT tested.
Can anyone advise me please?
Samthepan
Thread
antique
buying
fixture
light
original
screwfix
wiring
I have a two-light fixture in my kitchen. See this video showing the flickering. Here are the observations:
Both light flicker at different times seemingly randomly
80% of the time they don't flicker
It worked for many years
Roughly 4 years ago it flickered for like a week then it stopped.
The...
Looking for recommendations for an affordable MR16 12vac 5w RGB led bulb for an enclosed fixture. I am installing fixtures in my pool cage in my lanai. I will need 10 bulbs.
How to fix or disable a photoelectric sensor in an exterior light fixture? Mine is broken in porch so that the bulb light never turns on regardless if is night time, Thanks
Source URL: DIY Electrical Forum - https://www.electriciansforums.net/forums/diy-electrical-forum.64/
I just took down an old chandelier. I'm looking to swap it out with a different old fixture, but I am interested in making it as safe as possible.
I attached a picture of the fixture box as it is now and would really appreciate opinions on what needs to be done. At the very least, I feel like...
Hi,
I had a working ceiling light fixture in a closet that was swapped out for a new LED light by a family member. The old fixture was working fine but unfortunately the wiring was not documented before it got disconnected and my family member ran into some issues figuring out how to connect...
Hi, I have changed our light fixture that used 3x 7w e14 bulbs to 30w led panel, but the light does not work. The wiring is correct and both lights are rated 230v 50hz.
Do I need LED driver or is there possibly some other problem?
Thank you in advance.
So I was changing a lightbulb with a wide bayonet base to it. The actual glass bulb itself has come away completely, but the bayonet base and contact wires are still stuck in the light. How do I remove this?
Hey guys would appreciate some help wiring a new light fixture. It has two separate switches that control it. The way the wires are exactly lt how it looked when I took down the old fixture. Please see the attached picture.
Thank you!
I had the All Pro dusk to dawn installed in 2015..the light bulb burned out last week. The electrician replaced the fluorescent bulb. That night it did not light although they checked the bulb earlier it worked. I read where you might have to reset breaker so I did and the light worked two...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc