induction hob

  1. D

    Induction hob tripping RCD in normal operation?

    Hi chaps, As some of you may recall, I posted a while back about a dodgy electrician who did some work at my parents place, including putting in a circuit for a new induction hob, as well as a board. He cocked a load of things up so following a complaint to the NICEIC, the guy came back today...
  2. N

    Induction hob tripping 30mA rcd

    Morning all. I'm in search of ideas. Been installing an induction hob on a 6mm radial backed up by a 32a mcb. Came to power up yesterday and with all hobs on its throwing out the 30mA main switch rcd. (It's a TT system). Iv tested all my cables and there all clear so it's taking it out on...
  3. Joe S

    Neff Induction Hob Power and Load question?

    I have a customer who is having a Kitchen fitted and has all the appliances picked out and ordered. The hob is an induction type hob and it says in the Kitchen Costing that it is a 20a Load required. When investigating the actual spec of the hob it states clearly that it is a 4.6kw Hob. I just...
  4. B

    Sorry - another induction hob / oven wiring question (appliance spec's included)...

    Hi all, Looking for a bit of advice please... My Sparky is away for a while (unsure how long - family bereavement) but I need to get the kitchen walls plastered to keep things moving, so looking for confirmation of the best approach before the chases are filled, yet not doing anything...
  5. J

    10mm radial for oven & induction hob?

    I'm re-wiring a house which is being renovated and the customer has no idea yet what the rating of the oven & induction hob (both electric) will be but want cables run so they can board & plaster the ceiling (concrete floors) so I'm planning on running a 10mm radial to the wall the switch & CCU...
  6. J

    Induction hob conecction cable

    Hi, I have recently had the kitchen rewired and want to fit a 7.2kw induction hob. Wire in wall is 6mm t+e to the power outlet backed up by a 32a mcb. the hob will be installed in the worktop directly above a built under double oven. The instillation manual for the hob specifies cable type...
  7. S

    Induction hob with x 2 single ovens best wiring layout tips

    If i run 6mm to oven switch to supply induction hob via ccu. Any tips on the best way to wire the two single ovens in.
  8. Mike Johnson

    Induction hob on two phase.

    Hi all I have an induction hob that is wired up on two phase's of a three phase supply (oven on the third phase) the requirement for an isolation switch is giving me a bit of a headache as I can't seem to find a three pole domestic switch, any ideas? Mike
  9. E

    induction hob wiring?

    morning all, stopped to have a look at a job last night and the customer has a domestic induction hob to be fitted ( model ind60t ) no wiring diagram or installation details. the hob has a 5 core cable pre-wired earth blue brown black grey never come across this before ,has anyone got any...
  10. W

    Induction hob mixed opinion.

    Hi guys, Im getting some mixed opinion about how i should go about wiring in a new induction hob and cooker. The current cooker is going to be moved above the work surface and built into the kitchen furniture about 4 ft from the floor while the induction hob is going to be fitted into the...
  11. S

    30A induction hob and 30A oven

    Hi guys I'm installing 2 new circuits for a 30A hob and 30A cooker. I'm drilling holes through joists and clipping direct, the cable run is around 25m each, i'm going to use 4.0mm? We all agree this is ok? :cool:
  12. G

    Induction Hob - diversity.

    Obviously it's new technology and not necessarily dealt with in existing regs. But anyone know if diversity is applied any differently when installing ? ie 10 Amps plus 30% of remaining load. ? cheers
  13. J

    Neff Induction Hob Mains Supply Cable???

    Hi, I recently bought an ex display Neff Induction Hob. Unfortunately the power cable to it has been cut off and needs replacing. Is it possible to fix this? Where can I get a new cable from? Will I need a wiring diagram? Any info would be greatly appreciated! Thanks, JLO
  14. E

    Induction hob

    Hi guys just a quick question, i have wired in a 6mm T&E for a cooker and the client has ordered a 17.4kw oven with induction hob. Is there any change for the calculation for diversity or is it still the same,, hence 10a of total then 30% of remainder giving me a total load of 29.69AMPS...
  15. M

    cooker and induction hob urgent help URGENT ASAP

    just having an argument with a customer at the min n need total clarfication on this,fitted a cooker on 6mm radial 32 amp supply as was originally installed ,but she has bought an induction hob which is fed from the same circuit as the cooker which is 7.5kw on full power would the cable be...
  16. N

    NEFF induction hob

    We have been doing as little bit of remedial work and indentifying circuits on a new build that the original electrician has been binned from. I wont go on about the things we've found as that is not why im posting. The owner has a grown up disabled son who likes to be "in to everything"...
  17. A

    oven / induction hob question

    Customer is having 2 ovens, both rated at 3K55W each so 15.5A Would the best way be to run two 2.5 radials on a 20A mcb or have them on a 4mm ring 32A breaker (or rad even to seperate them?) Also, they are having an induction hob rated at 7K09W, 31A. Would sticking this on a 32A mcb be...
  18. L

    CDA Induction Hob

    Hi all a newbie here! I have a CDA Induction Hob and when I came to fit it to the Cooker socket I found that the Hob has 6 terminals L - R are Earth then 5 4 3 2 1 5 & 4 are linked as is 3 2 & 1 My question is as I've never seen / fitted one of these: which is live & nuetral please? thanks in...
  19. D

    induction hob!

    Hi guys. Does anyone know if its right that an induction hob has to go on its own circuit or can it still share a circuit with another appliance? OSG saying up to 15Kw from a standard 32A supply. Cheers
  20. M

    Induction Hob Connection

    Hi I appreciate i need a qualified electrician but this is just to assist with a buying decision. We considering induction hob that requires 32amp supply. Existing electric oven is connected to switch with socket that can be seen at following link...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock