Neff Induction Hob Mains Supply Cable???

[JLO]

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Hi,

I recently bought an ex display Neff Induction Hob. Unfortunately the power cable to it has been cut off and needs replacing. Is it possible to fix this? Where can I get a new cable from? Will I need a wiring diagram? Any info would be greatly appreciated!

Thanks,
JLO

 

[Graeme Harrold]

Take it back to the supplier, even ex-display must adhear to the requirements of sale.

 

[IQ Electrical]

Take it back to the supplier, even ex-display must adhear to the requirements of sale.

Yes, unless the product was described to you as 'without flex' then you are entitled to a replacement or repair.

Alternatively, a quick call to NEFF technical department might get your question answered.

 

[AlanWirral]

Last one I fitted was put on it's own 6mm supply! Flex? You sure?

 

[Spudnik]

Yes they do have a butyl type flex, normaly five core.

two pairs of two cores are crimped together to make the Line and N connections.

4mm flex will easily cope with 32A

 

[AlanWirral]

Oh ritey...the one i did never had any flex on just the normal type of cooker connections.

 

[SirKit Breaker]

Last Neff induction hob i fitted was 11.5Kw, put in a 10mm cable for it, it came prewired with a 6mm heat resistant flex IIRC.

 

[AlanWirral]

Yeah i seem to remember the one i did being 11KW. I got mixed up...i did 2 ovens on a 10mm supply but also put in a 10mm supply for the hob.

 

[IQ Electrical]

Re: Uninyvin cable/nyvin cable

PTFE/TEFLON CABLE, UNINYVIN CABLE/NYVIN CABLE, RUBBER CABLE/SILICONE CABLE in India.

Er ok.....

 

[High Tower]

Er ok.....

Ignore it not worth the hits on his page, the cretin has spammed most of the site