Posted this in the main forum, just realised this forum was here...
I have just completed a basic PAT test qaulification ( PAT Testing Course Training - PAT Training courses for Pat Testing in the UK )
this allows me to inspect, test and report. If however i find a plug that needs replacing...
Hi All,
Just want to run something by you, have been asked to complete a job which consists of like for like replacement of various lights fixtures and fittings. Basically they are replacing old lights with led and low energy etc.
Client has requested a minor works cert on completion, this is...
elementps
Thread
certificate
customer
electrical work
minor
tests
works
Hi, I did C&G 2377 a couple of years ago and have only recently been asked by company to do some portable appliance testing for them.
Now, I'm trying to remember how to test class 2 equipment. I've looked around the internet the best I can and haven't really found an answer.
How I understand it...
Yesterday I went out to a small block of flats to deal with a fault on part of the landlords supply and discuss fitting a fire alarm system. I pointed out to the landlord that the building as a whole, 4 flats and the communal area had never been tested and that he should consider having an EICR...
Hello gents, I don't normally pop in here but I believe its the best place to ask a question on behalf of a friend. And it is a friend, I don't do PV.
Q. My boss as told me not to waste time testing the DC side of PV installations, only the AC.
My friend has not put his signature...
When carrying out the tests: live polarity of the supply, Ze, and PFC on a TN-s single phase system, what happens to the double pole main switch? is it off or on?
Many Thanks.
HI, please help
I passed my C&G PAT testing more than a year ago and never used the training, it was a good idea at the time....
Anyway cutting a long story short, I have now started a PC shop selling used machines but I cannot remember how to PAT test ...properly.....
I have bought a Robin...
geoff1960
Thread
earth
earth bond
leakage
pat
pat testing
please
robin
tests
Had another dispute with who i was working with today, with testing an new installation. Here goes
I always thought that the proper testing sequence is R1+R2, continuity of bonding, insulation resistance. Then ze, then zs. rcd
But the person i was working with today told me i should always...
Hey can anyone help, I've got a EICR (Periodic inspection) tomorrow and just been told its a 3 phase supply. Am i right in thinking i just do L1-N-E, L2-N-E and L3-N-E then take the highest reading, also is it the same to get PFC????
alright everyone
passed my 17th edition yesterday so thank you to all who gave me the tips, i know we are going onto the green book in january but if anyone would like a load of mock tests with answers for the red book let me know and i,ll try to figure out how to get them on here from my...
Hi all,
Im in the early stages of learning testing and was wanting to know if any of you could help me understand two lead / three lead testing.
Why do you need a third lead for some tests, when other makes of meter can do the exact same test but with two leads??
I understand that the meter...
Lads odd fault.
Breaker trips 20 mins-1 hour after being switched back on. 32 amp ring, old wylex board with push fit circuit breaker. Wiring is a mess. Ring is for sockets. It has exterior lights, alarm, boiler , attic lights, pond pump and fountain - all from jb's in attic - thoughts...
Something is confusing me somewhat: Can someone, in idiot terms :13:, please explain what tests are required on a SELV circuit. For example, a downlighter in a kitchen with a SELV transformer. It is something that I cannot get my head around. What connections are made on the circuit and...
Went to a job today where a lovely new bathroom has just been fitted upstairs with a new 8.5 Kw shower replacing a 7.2kw one. After a few minutes in the shower the MCB trips. The shower was fully turned up and when I asked the customer they said that they always ran it like this. On inspecting...
olsonn
Thread
6mm
aus
cable
customer
insulation
mcb
shower
tests
tripping
Hi all not sure if I'm zeroing my test instrument correctly as I've got different test results when carrying out my pefc an psc.
What I've been doing when carrying out these tests is connecting all the 3 test leads together and holding zero however on the display it's stating 0.14 ohms...
Hello,
I am about to conduct my first initial verification and i have spent all weekend reviewing how to do the recommended tests. However I have a question regarding final ring circuit test.
1- is this only for a ring main circuit with outgoing line and incoming line?
2- if the answer is...
I used my fluke for the first time today practicing on a test board I built up for 2391 paractical exam.
I went through all the tests and got to the live tests.
First test was supply polarity and I am getting a reversed L-N reading on the display. L-E read fine, N-E also reads fine...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.